EXHAUST INSULATION WRAP2'X50FT
Exhaust Insulating Wrap - Natural
2" Wide. 50ft. Roll
The Original Exhaust Insulating Wrap was developed almost 20 years ago by Thermo-Tec. Exhaust Insulating Wrap is an innovative way to create more horsepower and reduce temperatures under the hood. Wrapping headers with Exhaust Insulating Wrap maintains hotter exhaust gases that exit the system faster through decreased density. This produces increased exhaust scavenging, as well as lower intake temperatures. Exhaust Insulating Wrap withstands continuous heat up to 2000°F (1095°C) and it contains no asbestos. Exhaust Insulating Wrap, available in natural and graphite black colors, is sold in 15 ft. (4.5 Metre) and 50 ft. (15 metre) rolls, 1 inch (25mm) and 2 inches (50mm) wide. All Exhaust Wrap has a low profile 1/16 inch thickness.
EXHAUST INSULATION WRAP2'X50FT BLACK
Exhaust Insulation Wrap
2" Wide, 50ft Length, Black
Aeroflow's exhaust wrap is an innovative way to reduce unwanted and power robbing engine compartment heat, by wrapping your exhaust headers and down pipes you decrease exhaust density and increase exhaust flow resulting in more power! The White and Black exhaust wrap are rated to withstand 1200°F / 650°C direct heat and 2000°F / 1100°C of radiant heat.
BLACK HI HEAT EXH WRAP SPRAY
Hi-Heat Coating Spray - Black
11oz. (325ml)
Use the Hi-Heat Coating to finish off a clean and well-protected Exhaust Insulating Wrap installation. The coating will protect the wrap from abrasion and harmful liquid spills. Extra resins and binders toughen the surface and help extend the life of the wrap by protecting it from friction. They also seal the pores to minimize the penetration of harmful liquids. The 11oz. (325ml) spray coating now comes in three colors - black, aluminum and copper.
THERMOTEC V8 KIT SNAP STRAP
Snap Strap Kit - V8
8" x 9" & 4" x 18" straps
New and improved! Same quality stainless steel straps with a dependable multi-lock system, now in standard lengths. No more cutting to length, then attaching the lock. Narrow width straps come in precut lengths with the multi-lock already attached - just insert the end and pull to tighten. Snap Strap comes in individual sizes of 9" and 18"; also in kits for V-6 or V-8 applications.
ADHESIVE BACKED HEAT BARRIER 12' X 12'
Adhesive-Backed Heat Barrier
12" x 12" (305 x 305mm)
The adhesive-backed composite material can be easily applied to any surface or wrapped around a hose or wire to make a clean, professional appearance. The highly reflective surface is capable of withstanding radiant temperatures in excess of 2000°F (1095°C) Adhesive Backed Heat Barrier is available in four sizes.
THERMO SLEEVE 1/4 - 1/2 ID
Thermo-Sleeve - 3ft. Roll
1/4" to 1/2" (6 to 12mm)
Thermo-Sleeve is the combination of a high temperature fabric laminated to a highly reflective Mylar foil. It provides protection from radiant heat for hoses and wires. Thermo-Sleeve's ultra light weight construction provides more insulation than traditional bulky rubber-coated fiberglass. The aluminized sleeve reflects more than 90% of radiant heat. It is fireproof and oil resistant. Thermo-Sleeve is pack aged in 3 foot, 12 foot or 50 foot lengths and five different inside diameter sizes.
THERMO SLEEVE 5/8- 1" ID
Thermo-Sleeve - 3ft. Roll
5/8" to 1" (16 to 25mm)
Thermo-Sleeve is the combination of a high temperature fabric laminated to a highly reflective Mylar foil. It provides protection from radiant heat for hoses and wires. Thermo-Sleeve's ultra light weight construction provides more insulation than traditional bulky rubber-coated fiberglass. The aluminized sleeve reflects more than 90% of radiant heat. It is fireproof and oil resistant. Thermo-Sleeve is pack aged in 3 foot, 12 foot or 50 foot lengths and five different inside diameter sizes.
ALUMINIZED STARTER HEAT SHIELD
Starter Heat Shield
7" x 22"
The Starter Heat Shield was developed to eliminate starter problems caused by close proximity of the exhaust to the starter. The universal kit enables the user to insulate the starter and solenoid. The unique construction of the aluminized material provides protection by reflecting 90% of radiant heat, up to 2000°F (1095°C).
THERMO-TEC SPARK PLUG BOOT
Spark Plug Boot Protector - 150mm Length
Black slip on design, withstands 500°F direct heat & 2000°F radiant heat, 4 pack
Aeroflow has become synonymous with premium quality performance products. Aeroflow's objective has been to incorporate state-of-the-art manufacturing, aerospace quality materials and rigid quality controls to produce quality performance products at extraordinary value. Aeroflow has taken its forward thinking knowledge to the street, manufacturing a wide range of race quality products to improve street performance and dependability.
MLS EXHAUST FLANGE GASKET PR
Mr Gasket Collector Gasket 3-1/2"Hole Dia, 47/16" Bolt Circle, 3/8" Bolt Hole Suit Dynomax, Flowtech, Hedman, Hooker Headers
These Multi-Layered Steel (MLS) collector gaskets are made from high grade stainless steel with three holes and an inside diameter of 3.5"