ENGINE MOUNT SUIT VB-VS COMMODORE LS SERIES
Performance Engine Mounts to suit VB-VS COMMODORES with THE LS SERIES ENGINES, direct bolt up no adaptors needed, the solution to your CONVERSION!
Will suit Pacemaker Extractors
Starter Relocation kit is required
***WILL NOT SUIT VL with 6CYL K-FRAME***
ENGINE MOUNT SUIT CHEV INTO HK-T-G
Performance Engine Mounts to suit HK- HT- HG Holdens with either BIG BLOCK or SMALL BLOCK CHEV Engines, direct bolt up no adaptors needed, the solution to your engine needs
ENGINE MOUNT SUIT LS1 INTO HQ-WB, LH-LX
erformance Engine Mounts to suit HQ-WB & LH-LX, LC-LJ TORANA'S with the LS SERIES ENGINES, direct bolt up no adaptors needed, the solution to your engine needs, 100% CAPTIVE, DESIGNED WITH HORSEPOWER IN MIND
These mounts only work with the Moroso Sump or the NEW Cast spin on filter sump for Drop in applications
These will not fit with ANY OTHER SUMP than those listed above, please take note!
ENGINE MOUNT SUIT CHEV INTO HQ-WB & LH-LX & LC-LJ
Performance Engine Mounts to suit HQ-WB and LH-LX Torana's with either BIG BLOCK or SMALL BLOCK CHEV Engines standard to BIG HP Applications
Engine remains 100% Captive
easier removal and install of engine
easy to replace Nolothane Bush
ENGINE MOUNTS SUIT LS1 INTO HK-T-G HOLDEN
THESE MOUNTS ARE TO SUIT ALL HT-HG-HK HOLDENS.
DESIGNED AS A STRAIGHT BOLT UP FITMENT WITH NO ADAPTORS NEEDED.
ENGINE MOUNTS SUIT 308 INTO HK-T-G HOLDEN
TUFF MOUNTS TO SUIT HK-T-G HOLDENS WITH 253-304-308 ENGINE's
V8 standard to BIG HP Applications
Engine remains 100% Captive
easier removal and install of engine easy to replace Nolothane Bush
ENGINE MOUNT SUIT LS INTO VE COMMODORE
MUSCLE GARAGE'S CURE FOR BIG HORSEPOWER LS ENGINE'S KILLING THE FACTORY HYDRAULIC MOUNTS
THESE ARE DESIGNED AS A STRIGHT FORWARD INSTALL TO REPLACE THE OEM HYDRAULIC OIL FILLED RUBBER MOUNTS
DESIGNED TO TAKE BIG HORSEPOWER WHILST KEEPING THE ENGINE CAPTIVE AT ALL TIMES
SUIT CHRYSLER 340 360 ENG VJ ON VALIANT
TUFF MOUNTS to suit the Chrysler V8 engines as fitted to most Valiants and Chargers, 318 - 340 -360 Engines
designed with HORSEPOWER in mind, from Standard to Big Horsepower engines
Engine location does not change, no adaptors or spacers are required
Engine remains 100% Captive
easier removal and install of engine easy to replace Nolothane Bush
CHEV S/B INTO 67-69 CAMARO
TUFF MOUNTS to suit 67-68-69 CAMARO'S SMALL BLOCK ENGINES
these have been designed from the Original mounts from the Camaro fitted with the 350 SB Chev from factory, TUFF MOUNTs are the same as the LHD Factory Small block mounts (not the Z/28) which will suit the majority of all Camaro's here in Australia! these are a complete mount from crossmember to Engine, the Original Pedastool needs to be removed from the chassis rails
Designed to take big Horsepower whilst holding the Engine Captive at all times
SUIT CHRYSLER 340 360 ENG EARLY VALIANT
TUFF MOUNTS to suit the Chrysler V8 engines as fitted to most Valiants and Chargers, 318 - 340 -360 Engines
designed with HORSEPOWER in mind, from Standard to Big Horsepower engines
Engine location does not change, no adaptors or spacers are required
Engine remains 100% Captive
easier removal and install of engine easy to replace Nolothane Bush
Chev Engine Mount Adapter pairHQ-WB,LH-LX with Holden mount
Engine Mount Adapter
Suit Chevy V8 to Holden HQ-WB, Torana LH-LX
Aeroflow has become synonymous with premium quality performance products. Aeroflow's objective has been to incorporate state-of-the-art manufacturing, aerospace quality materials and rigid quality controls to produce quality performance products at extraordinary value. Aeroflow has taken its forward thinking knowledge to the street, manufacturing a wide range of race quality products to improve street performance and dependability.
ENGINE MOUNT SUIT VB-VT COMMODORE 304/308
Performance Engine Mounts to suit VB-VT V8 Commodores
standard to BIG HP Applications
Engine remains 100% Captive
easier removal and install of engine
easy to replace Nolothane Bush
ENGINE MOUNT SUIT RB30 INTO VL COMMODORE
TUFF MOUNTS to suit the VL Commodores running the RB30 Engines wether it be N/A or Turbo Engine's, Designed to take Punishment, made using 5mm STEEL not ALLUMINIUM like others, these TUFF MOUNTS will take 1200+ HP
designed as a direct replacement for the standard rubber mounts.
ENGINE MOUNT SUIT LS INTO VT-VZ COMMODORE
TUFF MOUNTS to suit the LS Series ENGINES in VT- VZ COMMODORES, Made with HORSEPOWER in Mind, will suit N/A, TURBO or BLOWN applications with ease, 100% captive, easy to fit, replaceable bushes
Never replace another Engine mount!
ENGINE MOUNT LS1 INTO 67-69 CAMARO
Designed as a straight bolt in Coversion Mount, bolt any LS Based engine into your 67-69 Camaro
100% captive, easy to replace bushes, easier to remove & refit engine, will handlemore power than ou can throw at them, more compact than OEM Mounts
finished in Powdercoat for Quaity Finish & Durability
Designed to be used in conjunction with the Holley Motorsport or GM LH8 LS Sumps
Designed & Manufactured by MUSCLE GARAGE in South Australia using only the best materials & Products
ENGINE MOUNT SUIT VB-VS COMMODORE CHEV
TUFF MOUNTS to suit SB & BB CHEV into VB-VS Commodores
Designed as a straight forward replacement for the CRS Mount & Adaptors
Designed to be abused, our new TUFF MOUNT to suit CHEV into Commodores will allow you to have all the confidence in using your engines power right to the limit, wether it be for a Burnout car, Drag Racing or even just your normal street car, TUFF MOUNTS will make your car better!
100% Australian Made, using only the best components, Powdercoated for durability, Chrome-moly Crushtubes, High Tensile Bolts.
ENGINE MOUNT SUIT FORD FG XR6 TURBO AND V8
Description Designed as a bolt in replacement for the OEM Hydraulic engine mounts, Tuff Mounts will take your Big Horsepower & Big Torque! 100% Captive Unbreakable design Easy to replace Polyurethane Bushes specifically designed for ENGINE NVH Finished in Powdercoat for Quality & Durability Designed & Manufactured in South Australia, using only the best Quality Products.
ENGINE MOUNT MUSTANG 65-70 & COUGAR - WIND, CLEV, DART BLOCK
TUFF MOUNTS to suit MUSTANG 1964-1970, will also suit Ford Cougar and some Aussie early Falcons
with the following Small Block engines, CLEVELAND, WINDSOR and designed with specific clearance for the DART Blocks
Designed to suit Standard to BIG HP Engines
Comes with full complete Bolt Kit & instructions
Aussie Designed & Manufactured here in South Australia
Finished in Gloss Black Powdercoat for looks & Durabilty
CHEV INTO CHEV MOUNTS 68MM SPACE
Finall the product you hve been waiting for has Arrived, we have managed to build a mount to replace the standard Chevrolet Engine mount (Pt # A1128) original TUFF MOUNTS Design, Original TUFF MOUNTS Quality & Standard.
Will suit
CAMARO
NOVA
CHEVELLE
CORVETTE
IMPALA
HOTRODS
ROD SHOP FRONT END's
Loads of other fitments as well
ENGINE MOUNTS SUIT CLEVELAND AND WINDSOR V8
TUFF MOUNTS TO SUIT CLEVELAND AND WINDSOR V8'S INTO XR -XF FALCONS & SOME MUSTANGS
CLEVELAND
WINDSOR
DART
DIRECT BOLT UP FITMENT, (YOU WILL REQUIRE THE V8 CHASSIS MOUNTS)