-3 FEMALE UNION - ALLOY
Speedflow -3AN Female Flare to -3AN Female Flare Straight Swivel Fitting "Aluminium".
Made from 6061 aluminium making this a very strong and compact joiner.
Red & blue hard anodised aluminium construction (Also available in Black anodised finish).
-3 FEMALE UNION - ALLOY
Speedflow -3AN Female Flare to -3AN Female Flare Straight Swivel Fitting "Aluminium".
Made from 6061 aluminium making this a very strong and compact joiner.
Black anodised finish.
-3 FEMALE UNION - STEEL
Speedflow -3AN Female Flare to -3AN Female Flare Straight Swivel Fitting "Steel".
Made from CS 1030 Steel and Plated using Electroless Nickel Process that provides a high degree of corrosion resistance and bright finish.
-4 FEMALE UNION
Speedflow -4AN Female Flare to -4AN Female Flare Straight Swivel Fitting "Aluminium".
Made from 6061 aluminium making this a very strong and compact joiner.
Red & blue hard anodised aluminium construction (Also available in Black anodised finish).
-4 FEMALE UNION
Speedflow -4AN Female Flare to -4AN Female Flare Straight Swivel Fitting "Aluminium".
Made from 6061 aluminium making this a very strong and compact joiner.
Black anodised finish.
-6 FEMALE UNION
Speedflow -6AN Female Flare to -6AN Female Flare Straight Swivel Fitting "Aluminium".
Made from 6061 aluminium making this a very strong and compact joiner.
Red & blue hard anodised aluminium construction (Also available in Black anodised finish).
-6 TO -8 FEMALE UNION
Speedflow -6AN Female Flare to -8AN Female Flare Straight Swivel Reducer Fitting "Aluminium".
Made from 6061 aluminium making this a very strong and compact joiner.
Red & blue hard anodised aluminium construction (Also available in Black anodised finish)
-6 TO -8 FEMALE UNION
Speedflow -6AN Female Flare to -8AN Female Flare Straight Swivel Reducer Fitting "Aluminium".
Made from 6061 aluminium making this a very strong and compact joiner.
Black hard anodised aluminium construction (Also available in Red/Blue anodised finish)
-6 FEMALE UNION
Speedflow -6AN Female Flare to -6AN Female Flare Straight Swivel Fitting "Aluminium".
Made from 6061 aluminium making this a very strong and compact joiner.
Black hard anodised aluminium construction
-8 FEMALE UNION
Speedflow -8AN Female Flare to -8AN Female Flare Straight Swivel Fitting "Aluminium".
Made from 6061 aluminium making this a very strong and compact joiner.
Red & blue hard anodised aluminium construction (Also available in Black anodised finish).
-8 TO -10 FEMALE UNION
Speedflow -8AN Female Flare to -10AN Female Flare Straight Swivel Reducer Fitting "Aluminium".
Made from 6061 aluminium making this a very strong and compact joiner.
Red & blue hard anodised aluminium construction (Also available in Black anodised finish).
-8 TO -10 FEMALE UNION
Speedflow -8AN Female Flare to -10AN Female Flare Straight Swivel Reducer Fitting "Aluminium".
Made from 6061 aluminium making this a very strong and compact joiner.
Black hard anodised aluminium construction (Also available in Red & Blue anodised finish).
-8 FEMALE UNION
Speedflow -8AN Female Flare to -8AN Female Flare Straight Swivel Fitting "Aluminium".
Made from 6061 aluminium making this a very strong and compact joiner.
Black hard anodised aluminium construction (Also available in Blue & Red anodised finish).
-10 FEMALE UNION
Speedflow -10AN Female Flare to -12AN Female Flare Straight Swivel Reducer Fitting "Aluminium".
Made from 6061 aluminium making this a very strong and compact joiner.
Red & blue hard anodised aluminium construction (Also available in Black anodised finish).
-10 TO -12 FEMALE UNION
Speedflow -10AN Female Flare to -12AN Female Flare Straight Swivel Reducer Fitting "Aluminium".
Made from 6061 aluminium making this a very strong and compact joiner.
Red & blue hard anodised aluminium construction (Also available in Black anodised finish).
-10 TO -12 FEMALE UNION
Speedflow -10AN Female Flare to -12AN Female Flare Straight Swivel Reducer Fitting "Aluminium".
Made from 6061 aluminium making this a very strong and compact joiner.
Black anodised finish.
-10 FEMALE UNION
Speedflow -10AN Female Flare to -12AN Female Flare Straight Swivel Reducer Fitting "Aluminium".
Made from 6061 aluminium making this a very strong and compact joiner.
Black anodised finish.
-12 FEMALE UNION
Speedflow -12AN Female Flare to -12AN Female Flare Straight Swivel Fitting "Aluminium".
Made from 6061 aluminium making this a very strong and compact joiner.
Red & blue hard anodised aluminium construction (Also available in Black anodised finish).
-12 FEMALE UNION
Speedflow -12AN Female Flare to -12AN Female Flare Straight Swivel Fitting "Aluminium".
Made from 6061 aluminium making this a very strong and compact joiner.
Black anodised finish.
-16 FEMALE UNION
Speedflow -16AN Female Flare to -16AN Female Flare Straight Swivel Fitting "Aluminium".
Made from 6061 aluminium making this a very strong and compact joiner.
Red & blue hard anodised aluminium construction (Also available in Black anodised finish).
-16 FEMALE UNION
Speedflow -16AN Female Flare to -16AN Female Flare Straight Swivel Fitting "Aluminium".
Made from 6061 aluminium making this a very strong and compact joiner.
Black anodised finish.
-20 FEMALE UNION
Speedflow -20AN Female Flare to -20AN Female Flare Straight Swivel Fitting "Aluminium".
Made from 6061 aluminium making this a very strong and compact joiner.
Red & blue hard anodised aluminium construction (Also available in Black anodised finish).
-20 FEMALE UNION
Speedflow -20AN Female Flare to -20AN Female Flare Straight Swivel Fitting "Aluminium".
Made from 6061 aluminium making this a very strong and compact joiner.
Black anodised finish.
-6 FEMALE UNION - 45°
Speedflow -6AN Female Swivel Nut to -6AN Female Swivel Nut 45° Union Adapter Fitting.
Manufactured from marine quality 6061-T6 billet aluminium for superior corrosion and fatigue resistance.
Made with a unique forged tube design making this a very strong and compact joiner.
Red & Blue hard anodised aluminium construction (Also available in Black anodised finish).
-6 FEMALE UNION - 45°
Speedflow -6AN Female Swivel Nut to -6AN Female Swivel Nut 45° Union Adapter Fitting.
Manufactured from marine quality 6061-T6 billet aluminium for superior corrosion and fatigue resistance.
Made with a unique forged tube design making this a very strong and compact joiner.
Black hard anodised aluminium construction
-8 FEMALE UNION - 45°
Speedflow -8AN Female Swivel Nut to -8AN Female Swivel Nut 45° Union Adapter Fitting.
Manufactured from marine quality 6061-T6 billet aluminium for superior corrosion and fatigue resistance.
Made with a unique forged tube design making this a very strong and compact joiner.
Red & Blue hard anodised aluminium construction (Also available in Black anodised finish).
-8 FEMALE UNION - 45°
Speedflow -8AN Female Swivel Nut to -8AN Female Swivel Nut 45° Union Adapter Fitting.
Manufactured from marine quality 6061-T6 billet aluminium for superior corrosion and fatigue resistance.
Made with a unique forged tube design making this a very strong and compact joiner.
Black hard anodised aluminium construction (Also available in Red & Blue anodised finish).
-10 FEMALE UNION - 45°
Speedflow -10AN Female Swivel Nut to -10AN Female Swivel Nut 45° Union Adapter Fitting.
Manufactured from marine quality 6061-T6 billet aluminium for superior corrosion and fatigue resistance.
Made with a unique forged tube design making this a very strong and compact joiner.
Red & Blue hard anodised aluminium construction (Also available in Black anodised finish).
-10 FEMALE UNION - 45°
Speedflow -10AN Female Swivel Nut to -10AN Female Swivel Nut 45° Union Adapter Fitting.
Manufactured from marine quality 6061-T6 billet aluminium for superior corrosion and fatigue resistance.
Made with a unique forged tube design making this a very strong and compact joiner.
Black anodised finish.
-12 FEMALE UNION - 45°
Speedflow -12AN Female Swivel Nut to -12AN Female Swivel Nut 45° Union Adapter Fitting.
Manufactured from marine quality 6061-T6 billet aluminium for superior corrosion and fatigue resistance.
Made with a unique forged tube design making this a very strong and compact joiner.
Red & Blue hard anodised aluminium construction (Also available in Black anodised finish).
-12 FEMALE UNION - 45°
Speedflow -12AN Female Swivel Nut to -12AN Female Swivel Nut 45° Union Adapter Fitting.
Manufactured from marine quality 6061-T6 billet aluminium for superior corrosion and fatigue resistance.
Made with a unique forged tube design making this a very strong and compact joiner.
Black anodised finish.
-16 FEMALE UNION - 45°
Speedflow -16AN Female Swivel Nut to -16AN Female Swivel Nut 45° Union Adapter Fitting.
Manufactured from marine quality 6061-T6 billet aluminium for superior corrosion and fatigue resistance.
Made with a unique forged tube design making this a very strong and compact joiner.
Red & Blue hard anodised aluminium construction (Also available in Black anodised finish).
-16 FEMALE UNION - 45°
Speedflow -16AN Female Swivel Nut to -16AN Female Swivel Nut 45° Union Adapter Fitting.
Manufactured from marine quality 6061-T6 billet aluminium for superior corrosion and fatigue resistance.
Made with a unique forged tube design making this a very strong and compact joiner.
Black anodised finish.
-4 FEMALE UNION - 90°
Speedflow -4AN Female Swivel Nut to -4AN Female Swivel Nut 90° Union Adapter Fitting.
Manufactured from marine quality 6061-T6 billet aluminium for superior corrosion and fatigue resistance.
Made with a unique forged tube design making this a very strong and compact joiner.
Red & Blue hard anodised aluminium construction (Also available in Black anodised finish).
-4 FEMALE UNION - 90°
Speedflow -4AN Female Swivel Nut to -4AN Female Swivel Nut 90° Union Adapter Fitting.
Manufactured from marine quality 6061-T6 billet aluminium for superior corrosion and fatigue resistance.
Made with a unique forged tube design making this a very strong and compact joiner.
Black anodised finish.
-6 FEMALE UNION - 90°
Speedflow -6AN Female Swivel Nut to -6AN Female Swivel Nut 90° Union Adapter Fitting.
Manufactured from marine quality 6061-T6 billet aluminium for superior corrosion and fatigue resistance.
Made with a unique forged tube design making this a very strong and compact joiner.
Red & Blue hard anodised aluminium construction
-6 FEMALE UNION - 90°
Speedflow -6AN Female Swivel Nut to -6AN Female Swivel Nut 90° Union Adapter Fitting.
Manufactured from marine quality 6061-T6 billet aluminium for superior corrosion and fatigue resistance.
Made with a unique forged tube design making this a very strong and compact joiner.
Black hard anodised aluminium construction
-8 FEMALE UNION - 90°
Speedflow -8AN Female Swivel Nut to -8AN Female Swivel Nut 90° Union Adapter Fitting.
Manufactured from marine quality 6061-T6 billet aluminium for superior corrosion and fatigue resistance.
Made with a unique forged tube design making this a very strong and compact joiner.
Red & Blue hard anodised aluminium construction (Also available in Black anodised finish).
-8 FEMALE UNION - 90°
Speedflow -8AN Female Swivel Nut to -8AN Female Swivel Nut 90° Union Adapter Fitting.
Manufactured from marine quality 6061-T6 billet aluminium for superior corrosion and fatigue resistance.
Made with a unique forged tube design making this a very strong and compact joiner.
Black hard anodised aluminium construction (Also available in Blue & Red anodised finish).
-10 FEMALE UNION - 90°
Speedflow -10AN Female Swivel Nut to -10AN Female Swivel Nut 90° Union Adapter Fitting.
Manufactured from marine quality 6061-T6 billet aluminium for superior corrosion and fatigue resistance.
Made with a unique forged tube design making this a very strong and compact joiner.
Red & Blue hard anodised aluminium construction (Also available in Black anodised finish).
-10 FEMALE UNION - 90°
Speedflow -10AN Female Swivel Nut to -10AN Female Swivel Nut 90° Union Adapter Fitting.
Manufactured from marine quality 6061-T6 billet aluminium for superior corrosion and fatigue resistance.
Made with a unique forged tube design making this a very strong and compact joiner.
Black anodised finish.
-12 FEMALE UNION - 90°
Speedflow -12AN Female Swivel Nut to -12AN Female Swivel Nut 90° Union Adapter Fitting.
Manufactured from marine quality 6061-T6 billet aluminium for superior corrosion and fatigue resistance.
Made with a unique forged tube design making this a very strong and compact joiner.
Red & Blue hard anodised aluminium construction (Also available in Black anodised finish).
-12 FEMALE UNION - 90°
Speedflow -12AN Female Swivel Nut to -12AN Female Swivel Nut 90° Union Adapter Fitting.
Manufactured from marine quality 6061-T6 billet aluminium for superior corrosion and fatigue resistance.
Made with a unique forged tube design making this a very strong and compact joiner.
Black anodised finish.
-16 FEMALE UNION - 90°
Speedflow -16AN Female Swivel Nut to -16AN Female Swivel Nut 90° Union Adapter Fitting.
Manufactured from marine quality 6061-T6 billet aluminium for superior corrosion and fatigue resistance.
Made with a unique forged tube design making this a very strong and compact joiner.
Red & Blue hard anodised aluminium construction (Also available in Black anodised finish).
-16 FEMALE UNION - 90°
Speedflow -16AN Female Swivel Nut to -16AN Female Swivel Nut 90° Union Adapter Fitting.
Manufactured from marine quality 6061-T6 billet aluminium for superior corrosion and fatigue resistance.
Made with a unique forged tube design making this a very strong and compact joiner.
Black anodised finish.
-6 FEMALE UNION - 180°
Speedflow -6AN Female Swivel Nut to -6AN Female Swivel Nut 180° Union Adapter Fitting.
Manufactured from marine quality 6061-T6 billet aluminium for superior corrosion and fatigue resistance.
Made with a unique forged tube design making this a very strong and compact joiner.
Red & Blue hard anodised aluminium construction (Also available in Black anodised finish).
Hole Centre 33mm.
-6 FEMALE UNION - 180°
Speedflow -6AN Female Swivel Nut to -6AN Female Swivel Nut 180° Union Adapter Fitting.
Manufactured from marine quality 6061-T6 billet aluminium for superior corrosion and fatigue resistance.
Made with a unique forged tube design making this a very strong and compact joiner.
Black hard anodised aluminium construction
Hole Centre 33mm.
-8 FEMALE UNION - 180°
Speedflow -8AN Female Swivel Nut to -8AN Female Swivel Nut 180° Union Adapter Fitting.
Manufactured from marine quality 6061-T6 billet aluminium for superior corrosion and fatigue resistance.
Made with a unique forged tube design making this a very strong and compact joiner.
Red & Blue hard anodised aluminium construction (Also available in Black anodised finish).
Hole Centre - 40mm.
-8 FEMALE UNION - 180°
Speedflow -8AN Female Swivel Nut to -8AN Female Swivel Nut 180° Union Adapter Fitting.
Manufactured from marine quality 6061-T6 billet aluminium for superior corrosion and fatigue resistance.
Made with a unique forged tube design making this a very strong and compact joiner.
Black hard anodised aluminium construction (Also available in Blue & Red anodised finish).
Hole Centre - 40mm.
-3 FEM TO MALE - 1/8"NPT PORT
Speedflow -3AN Female Swivel Nut to -3AN Male Flare Union with 1/8" NPT Port Adapter.
Manufactured from CS 1030 Steel and Plated using Electroless Nickel Process that provides a high degree of corrosion resistance and gives nice bright finish.
Accepts standard 1/8"NPT Gauges, Senders or Hoses.
-4 FEM TO MALE - 1/8"NPT PORT
Speedflow -4AN Female Swivel Nut to -4AN Male Flare Union with 1/8" NPT Port Adapter.
Manufactured from marine quality 6061-T6 billet aluminium for superior corrosion and fatigue resistance.
Accepts standard 1/8"NPT Gauges, Senders or Hoses.
Red & Blue hard anodised aluminium construction (Also available in Black anodised finish).
-4 FEM TO MALE - 1/8"NPT PORT
Speedflow -4AN Female Swivel Nut to -4AN Male Flare Union with 1/8" NPT Port Adapter.
Manufactured from marine quality 6061-T6 billet aluminium for superior corrosion and fatigue resistance.
Accepts standard 1/8"NPT Gauges, Senders or Hoses.
Black anodised finish.
-6 FEM TO MALE - 1/8"NPT PORT
Speedflow -6AN Female Swivel Nut to -6AN Male Flare Union with 1/8" NPT Port Adapter.
Manufactured from marine quality 6061-T6 billet aluminium for superior corrosion and fatigue resistance.
Accepts standard 1/8"NPT Gauges, Senders or Hoses.
Red & Blue hard anodised aluminium construction (Also available in Black anodised finish).
-6 FEM TO MALE - 1/8"NPT PORT
Speedflow -6AN Female Swivel Nut to -6AN Male Flare Union with 1/8" NPT Port Adapter.
Manufactured from marine quality 6061-T6 billet aluminium for superior corrosion and fatigue resistance.
Accepts standard 1/8"NPT Gauges, Senders or Hoses.
Black anodised finish.
-8 FEM TO MALE - 1/8"NPT PORT
Speedflow -8AN Female Swivel Nut to -8AN Male Flare Union with 1/8" NPT Port Adapter.
Manufactured from marine quality 6061-T6 billet aluminium for superior corrosion and fatigue resistance.
Accepts standard 1/8"NPT Gauges, Senders or Hoses.
Red & Blue hard anodised aluminium construction (Also available in Black anodised finish).
-8 FEM TO MALE - 1/8"NPT PORT
Speedflow -8AN Female Swivel Nut to -8AN Male Flare Union with 1/8" NPT Port Adapter.
Manufactured from marine quality 6061-T6 billet aluminium for superior corrosion and fatigue resistance.
Accepts standard 1/8"NPT Gauges, Senders or Hoses.
Black hard anodised aluminium construction (Also available in Blue & Red anodised finish).
-10 FEM TO MALE - 1/8"NPT PORT
Speedflow -10AN Female Swivel Nut to -10AN Male Flare Union with 1/8" NPT Port Adapter.
Manufactured from marine quality 6061-T6 billet aluminium for superior corrosion and fatigue resistance.
Accepts standard 1/8"NPT Gauges, Senders or Hoses.
Red & Blue hard anodised aluminium construction (Also available in Black anodised finish).
-10 FEM TO MALE - 1/8"NPT PORT
Speedflow -10AN Female Swivel Nut to -10AN Male Flare Union with 1/8" NPT Port Adapter.
Manufactured from marine quality 6061-T6 billet aluminium for superior corrosion and fatigue resistance.
Accepts standard 1/8"NPT Gauges, Senders or Hoses.
Black anodised finish.
-12 FEM TO MALE - 1/8"NPT PORT
Speedflow -12AN Female Swivel Nut to -12AN Male Flare Union with 1/8" NPT Port Adapter.
Manufactured from marine quality 6061-T6 billet aluminium for superior corrosion and fatigue resistance.
Accepts standard 1/8"NPT Gauges, Senders or Hoses.
Red & Blue hard anodised aluminium construction (Also available in Black anodised finish).
-12 FEM TO MALE - 1/8"NPT PORT
Speedflow -12AN Female Swivel Nut to -12AN Male Flare Union with 1/8" NPT Port Adapter.
Manufactured from marine quality 6061-T6 billet aluminium for superior corrosion and fatigue resistance.
Accepts standard 1/8"NPT Gauges, Senders or Hoses.
Black anodised finish.
-4 FEMALE TO MALE - 45°
Speedflow -4AN Female Swivel Nut to -4AN Male Flare 45° Union Adapter Fitting.
Manufactured from marine quality 6061-T6 billet aluminium for superior corrosion and fatigue resistance.
Made with a unique forged tube design making this a very strong and compact joiner.
Red & Blue hard anodised aluminium construction (Also available in Black anodised finish).
-4 FEMALE TO MALE - 45°
Speedflow -4AN Female Swivel Nut to -4AN Male Flare 45° Union Adapter Fitting.
Manufactured from marine quality 6061-T6 billet aluminium for superior corrosion and fatigue resistance.
Made with a unique forged tube design making this a very strong and compact joiner.
Black anodised finish.
-6 FEMALE TO MALE - 45°
Speedflow -6AN Female Swivel Nut to -6AN Male Flare 45° Union Adapter Fitting.
Manufactured from marine quality 6061-T6 billet aluminium for superior corrosion and fatigue resistance.
Made with a unique forged tube design making this a very strong and compact joiner.
Red & Blue hard anodised aluminium construction (Also available in Black anodised finish).
-6 FEMALE TO MALE - 45°
Speedflow -6AN Female Swivel Nut to -6AN Male Flare 45° Union Adapter Fitting.
Manufactured from marine quality 6061-T6 billet aluminium for superior corrosion and fatigue resistance.
Made with a unique forged tube design making this a very strong and compact joiner.
Black anodised finish.
-8 FEMALE TO MALE - 45°
Speedflow -8AN Female Swivel Nut to -8AN Male Flare 45° Union Adapter Fitting.
Manufactured from marine quality 6061-T6 billet aluminium for superior corrosion and fatigue resistance.
Made with a unique forged tube design making this a very strong and compact joiner.
Red & Blue hard anodised aluminium construction (Also available in Black anodised finish).
-8 FEMALE TO MALE - 45°
Speedflow -8AN Female Swivel Nut to -8AN Male Flare 45° Union Adapter Fitting.
Manufactured from marine quality 6061-T6 billet aluminium for superior corrosion and fatigue resistance.
Made with a unique forged tube design making this a very strong and compact joiner.
Black hard anodised aluminium construction (Also available in Blue & Red anodised finish).
-10 FEMALE TO MALE - 45°
Speedflow -10AN Female Swivel Nut to -10AN Male Flare 45° Union Adapter Fitting.
Manufactured from marine quality 6061-T6 billet aluminium for superior corrosion and fatigue resistance.
Made with a unique forged tube design making this a very strong and compact joiner.
Red & Blue hard anodised aluminium construction (Also available in Black anodised finish).
-10 FEMALE TO MALE - 45°
Speedflow -10AN Female Swivel Nut to -10AN Male Flare 45° Union Adapter Fitting.
Manufactured from marine quality 6061-T6 billet aluminium for superior corrosion and fatigue resistance.
Made with a unique forged tube design making this a very strong and compact joiner.
Black anodised finish.
-12 FEMALE TO MALE - 45°
Speedflow -12AN Female Swivel Nut to -12AN Male Flare 45° Union Adapter Fitting.
Manufactured from marine quality 6061-T6 billet aluminium for superior corrosion and fatigue resistance.
Made with a unique forged tube design making this a very strong and compact joiner.
Red & Blue hard anodised aluminium construction (Also available in Black anodised finish).
-12 FEMALE TO MALE - 45°
Speedflow -12AN Female Swivel Nut to -12AN Male Flare 45° Union Adapter Fitting.
Manufactured from marine quality 6061-T6 billet aluminium for superior corrosion and fatigue resistance.
Made with a unique forged tube design making this a very strong and compact joiner.
Black anodised finish.
-16 FEMALE TO MALE - 45°
Speedflow -16AN Female Swivel Nut to -16AN Male Flare 45° Union Adapter Fitting.
Manufactured from marine quality 6061-T6 billet aluminium for superior corrosion and fatigue resistance.
Made with a unique forged tube design making this a very strong and compact joiner.
Red & Blue hard anodised aluminium construction (Also available in Black anodised finish).
-16 FEMALE TO MALE - 45°
Speedflow -16AN Female Swivel Nut to -16AN Male Flare 45° Union Adapter Fitting.
Manufactured from marine quality 6061-T6 billet aluminium for superior corrosion and fatigue resistance.
Made with a unique forged tube design making this a very strong and compact joiner.
Black anodised finish.
-3 FEMALE TO MALE - 90° STEEL
Speedflow -3AN Female Swivel Nut to -3AN Male Flare 90° Union Adapter Fitting.
Manufactured from CS 1030 Steel and Plated using Electroless Nickel Process that provides a high degree of corrosion resistance and gives nice bright finish.
-4 FEMALE TO MALE - 90°
Speedflow -4AN Female Swivel Nut to -4AN Male Flare 90° Union Adapter Fitting.
Manufactured from marine quality 6061-T6 billet aluminium for superior corrosion and fatigue resistance.
Made with a unique forged tube design making this a very strong and compact joiner.
Red & Blue hard anodised aluminium construction (Also available in Black anodised finish).
-4 FEMALE TO MALE - 90°
Speedflow -4AN Female Swivel Nut to -4AN Male Flare 90° Union Adapter Fitting.
Manufactured from marine quality 6061-T6 billet aluminium for superior corrosion and fatigue resistance.
Made with a unique forged tube design making this a very strong and compact joiner.
Black anodised finish.
-6 FEMALE TO MALE - 90°
Speedflow -6AN Female Swivel Nut to -6AN Male Flare 90° Union Adapter Fitting.
Manufactured from marine quality 6061-T6 billet aluminium for superior corrosion and fatigue resistance.
Made with a unique forged tube design making this a very strong and compact joiner.
Red & Blue hard anodised aluminium construction (Also available in Black anodised finish).
-6 FEMALE TO MALE - 90°
Speedflow -6AN Female Swivel Nut to -6AN Male Flare 90° Union Adapter Fitting.
Manufactured from marine quality 6061-T6 billet aluminium for superior corrosion and fatigue resistance.
Made with a unique forged tube design making this a very strong and compact joiner.
Black hard anodised aluminium construction
-8 FEMALE TO MALE - 90°
Speedflow -8AN Female Swivel Nut to -8AN Male Flare 90° Union Adapter Fitting.
Manufactured from marine quality 6061-T6 billet aluminium for superior corrosion and fatigue resistance.
Made with a unique forged tube design making this a very strong and compact joiner.
Red & Blue hard anodised aluminium construction (Also available in Black anodised finish).
-8 FEMALE TO MALE - 90°
Speedflow -8AN Female Swivel Nut to -8AN Male Flare 90° Union Adapter Fitting.
Manufactured from marine quality 6061-T6 billet aluminium for superior corrosion and fatigue resistance.
Made with a unique forged tube design making this a very strong and compact joiner.
Black hard anodised aluminium construction (Also available in Blue & Red anodised finish).
-10 FEMALE TO MALE - 90°
Speedflow -10AN Female Swivel Nut to -10AN Male Flare 90° Union Adapter Fitting.
Manufactured from marine quality 6061-T6 billet aluminium for superior corrosion and fatigue resistance.
Made with a unique forged tube design making this a very strong and compact joiner.
Red & Blue hard anodised aluminium construction (Also available in Black anodised finish).
-10 FEMALE TO MALE - 90°
Speedflow -10AN Female Swivel Nut to -10AN Male Flare 90° Union Adapter Fitting.
Manufactured from marine quality 6061-T6 billet aluminium for superior corrosion and fatigue resistance.
Made with a unique forged tube design making this a very strong and compact joiner.
Black anodised finish.
-12 FEMALE TO MALE - 90°
Speedflow -12AN Female Swivel Nut to -12AN Male Flare 90° Union Adapter Fitting.
Manufactured from marine quality 6061-T6 billet aluminium for superior corrosion and fatigue resistance.
Made with a unique forged tube design making this a very strong and compact joiner.
Red & Blue hard anodised aluminium construction (Also available in Black anodised finish).
-12 FEMALE TO MALE - 90°
Speedflow -12AN Female Swivel Nut to -12AN Male Flare 90° Union Adapter Fitting.
Manufactured from marine quality 6061-T6 billet aluminium for superior corrosion and fatigue resistance.
Made with a unique forged tube design making this a very strong and compact joiner.
Black anodised finish.
-16 FEMALE TO MALE - 90°
Speedflow -16AN Female Swivel Nut to -16AN Male Flare 90° Union Adapter Fitting.
Manufactured from marine quality 6061-T6 billet aluminium for superior corrosion and fatigue resistance.
Made with a unique forged tube design making this a very strong and compact joiner.
Red & Blue hard anodised aluminium construction (Also available in Black anodised finish).
-16 FEMALE TO MALE - 90°
Speedflow -16AN Female Swivel Nut to -16AN Male Flare 90° Union Adapter Fitting.
Manufactured from marine quality 6061-T6 billet aluminium for superior corrosion and fatigue resistance.
Made with a unique forged tube design making this a very strong and compact joiner.
Black anodised finish.
-3 TEE SWIVEL ON BRANCH
Speedflow -3AN Male Tee Fitting with -3AN Female Swivel Nut on Branch.
Manufactured from CS 1030 Steel and Plated using Electroless Nickel Process that provides a high degree of corrosion resistance and gives nice bright finish.
-3 TEE SWIVEL ON BRANCH
Speedflow -3AN Male Tee Fitting with -3AN Female Swivel Nut on Branch.
Manufactured from CS 1030 Steel and Plated using Electroless Nickel Process that provides a high degree of corrosion resistance and gives nice bright finish.
-3 TEE SWIVEL ON BRANCH STEEL
Speedflow -3AN Male Tee Fitting with -3AN Female Swivel Nut on Branch.
Manufactured from CS 1030 Steel and Plated using Electroless Nickel Process that provides a high degree of corrosion resistance and gives nice bright finish.
-4 TEE SWIVEL ON BRANCH
Speedflow -4AN Male Tee Fitting with -4AN Female Swivel Nut on Branch.
Manufactured from marine quality 6061-T6 billet aluminium for superior corrosion and fatigue resistance.
Made from a billet bar and fully machined in a single process in a CNC machine.
Blue hard anodised aluminium construction (Also available in Black anodised finish).
-4 TEE SWIVEL ON BRANCH
Speedflow -4AN Male Tee Fitting with -4AN Female Swivel Nut on Branch.
Manufactured from marine quality 6061-T6 billet aluminium for superior corrosion and fatigue resistance.
Made from a billet bar and fully machined in a single process in a CNC machine.
Black anodised finish.
-6 TEE SWIVEL ON BRANCH
Speedflow -6AN Male Tee Fitting with -3AN Female Swivel Nut on Branch.
Manufactured from marine quality 6061-T6 billet aluminium for superior corrosion and fatigue resistance.
Made from a billet bar and fully machined in a single process in a CNC machine.
Blue hard anodised aluminium construction (Also available in Black anodised finish).
-6 TEE SWIVEL ON BRANCH
Speedflow -6AN Male Tee Fitting with -3AN Female Swivel Nut on Branch.
Manufactured from marine quality 6061-T6 billet aluminium for superior corrosion and fatigue resistance.
Made from a billet bar and fully machined in a single process in a CNC machine.
Black hard anodised aluminium construction (Also available in Blue anodised finish).
-8 TEE SWIVEL ON BRANCH
Speedflow -8AN Male Tee Fitting with -8AN Female Swivel Nut on Branch.
Manufactured from marine quality 6061-T6 billet aluminium for superior corrosion and fatigue resistance.
Made from a billet bar and fully machined in a single process in a CNC machine.
Blue hard anodised aluminium construction (Also available in Black anodised finish).
-8 TEE SWIVEL ON BRANCH
Speedflow -8AN Male Tee Fitting with -8AN Female Swivel Nut on Branch.
Manufactured from marine quality 6061-T6 billet aluminium for superior corrosion and fatigue resistance.
Made from a billet bar and fully machined in a single process in a CNC machine.
Black hard anodised aluminium construction (Also available in Blue anodised finish).
-10 TEE SWIVEL ON BRANCH
Speedflow -10AN Male Tee Fitting with -10AN Female Swivel Nut on Branch.
Manufactured from marine quality 6061-T6 billet aluminium for superior corrosion and fatigue resistance.
Made from a billet bar and fully machined in a single process in a CNC machine.
Blue hard anodised aluminium construction (Also available in Black anodised finish).
-10 TEE SWIVEL ON BRANCH
Speedflow -10AN Male Tee Fitting with -10AN Female Swivel Nut on Branch.
Manufactured from marine quality 6061-T6 billet aluminium for superior corrosion and fatigue resistance.
Made from a billet bar and fully machined in a single process in a CNC machine.
Black anodised finish.
-12 TEE SWIVEL ON BRANCH
Speedflow -12AN Male Tee Fitting with -12AN Female Swivel Nut on Branch.
Manufactured from marine quality 6061-T6 billet aluminium for superior corrosion and fatigue resistance.
Made from a billet bar and fully machined in a single process in a CNC machine.
Blue hard anodised aluminium construction (Also available in Black anodised finish).
-12 TEE SWIVEL ON BRANCH
Speedflow -12AN Male Tee Fitting with -12AN Female Swivel Nut on Branch.
Manufactured from marine quality 6061-T6 billet aluminium for superior corrosion and fatigue resistance.
Made from a billet bar and fully machined in a single process in a CNC machine.
Black anodised finish.
-3 TEE SWIVEL ON RUN
Speedflow -3AN Male Tee Fitting with -3AN Female Swivel Nut on Run.
Manufactured from marine quality 6061-T6 billet aluminium for superior corrosion and fatigue resistance.
Made from a billet bar and fully machined in a single process in a CNC machine.
Blue hard anodised aluminium construction (Also available in Black anodised finish).
-3 TEE SWIVEL ON RUN
Speedflow -3AN Male Tee Fitting with -3AN Female Swivel Nut on Run.
Manufactured from marine quality 6061-T6 billet aluminium for superior corrosion and fatigue resistance.
Made from a billet bar and fully machined in a single process in a CNC machine.
Black anodised finish.
-3 TEE SWIVEL ON RUN - STEEL
Speedflow -3AN Male Tee Fitting with -3AN Female Swivel Nut on Run.
Manufactured from CS 1030 Steel and Plated using Electroless Nickel Process that provides a high degree of corrosion resistance and gives nice bright finish.
-4 TEE SWIVEL ON RUN
Speedflow -4AN Male Tee Fitting with -4AN Female Swivel Nut on Run.
Manufactured from marine quality 6061-T6 billet aluminium for superior corrosion and fatigue resistance.
Made from a billet bar and fully machined in a single process in a CNC machine.
Blue hard anodised aluminium construction (Also available in Black anodised finish).
-4 TEE SWIVEL ON RUN
Speedflow -4AN Male Tee Fitting with -4AN Female Swivel Nut on Run.
Manufactured from marine quality 6061-T6 billet aluminium for superior corrosion and fatigue resistance.
Made from a billet bar and fully machined in a single process in a CNC machine.
Black anodised finish.
-6 TEE SWIVEL ON RUN
Speedflow -6AN Male Tee Fitting with -6AN Female Swivel Nut on Run.
Manufactured from marine quality 6061-T6 billet aluminium for superior corrosion and fatigue resistance.
Made from a billet bar and fully machined in a single process in a CNC machine.
Blue hard anodised aluminium construction (Also available in Black anodised finish).
-6 TEE SWIVEL ON RUN
Speedflow -6AN Male Tee Fitting with -6AN Female Swivel Nut on Run.
Manufactured from marine quality 6061-T6 billet aluminium for superior corrosion and fatigue resistance.
Made from a billet bar and fully machined in a single process in a CNC machine.
Black hard anodised aluminium construction (Also available in Blue anodised finish).
-8 TEE SWIVEL ON RUN
Speedflow -8AN Male Tee Fitting with -8AN Female Swivel Nut on Run.
Manufactured from marine quality 6061-T6 billet aluminium for superior corrosion and fatigue resistance.
Made from a billet bar and fully machined in a single process in a CNC machine.
Blue hard anodised aluminium construction (Also available in Black anodised finish).
-8 TEE SWIVEL ON RUN
Speedflow -8AN Male Tee Fitting with -8AN Female Swivel Nut on Run.
Manufactured from marine quality 6061-T6 billet aluminium for superior corrosion and fatigue resistance.
Made from a billet bar and fully machined in a single process in a CNC machine.
Black hard anodised aluminium construction (Also available in Blue anodised finish).
-10 TEE SWIVEL ON RUN
Speedflow -10AN Swivel Female Flare on Run to -10AN Male Flares Tee Fitting "Aluminium".
Made from 6061 aluminium with a unique forged tube design making this a very strong and compact joiner.
Blue hard anodised aluminium construction (Also available in Black anodised finish).
-10 TEE SWIVEL ON RUN
Speedflow -10AN Swivel Female Flare on Run to -10AN Male Flares Tee Fitting "Aluminium".
Made from 6061 aluminium with a unique forged tube design making this a very strong and compact joiner.
Black anodised finish.
-12 TEE SWIVEL ON RUN
Speedflow -12AN Swivel Female Flare on Run to -12AN Male Flares Tee Fitting "Aluminium".
Made from 6061 aluminium with a unique forged tube design making this a very strong and compact joiner.
Blue hard anodised aluminium construction (Also available in Black anodised finish).
-12 TEE SWIVEL ON RUN
Speedflow -12AN Swivel Female Flare on Run to -12AN Male Flares Tee Fitting "Aluminium".
Made from 6061 aluminium with a unique forged tube design making this a very strong and compact joiner.
Black anodised finish.
Y PIECE -8 FEMALE - 2x -6 MALE
Speedflow -8AN Female Swivel Nut to -6AN Male Y Fitting.
Manufactured from marine quality 6061-T6 billet aluminium for superior corrosion and fatigue resistance.
Made from a billet bar and fully machined in a single process in a CNC machine.
Hole Centers: -6AN Fittings = 25mm.
Red & Blue hard anodised aluminium construction (Also available in Black anodised finish).
Y PIECE -8 FEMALE - 2x -6 MALE
Speedflow -8AN Female Swivel Nut to -6AN Male Y Fitting.
Manufactured from marine quality 6061-T6 billet aluminium for superior corrosion and fatigue resistance.
Made from a billet bar and fully machined in a single process in a CNC machine.
Hole Centers: -6AN Fittings = 25mm.
Black hard anodised aluminium construction (Also available in Red & Blue anodised finish).
Y PIECE -6 FEMALE 2x -6 MALE
Speedflow -6AN Female Swivel Nut to -6AN Male Y Adapter Fitting.
Manufactured from marine quality 6061-T6 billet aluminium for superior corrosion and fatigue resistance.
Made from a billet bar and fully machined in a single process in a CNC machine.
When using 45° Fittings they will point straight.
Red & Blue hard anodised aluminium construction (Also available in Black anodised finish).
Y PIECE -6 FEMALE 2x -6 MALE
Speedflow -6AN Female Swivel Nut to -6AN Male Y Adapter Fitting.
Manufactured from marine quality 6061-T6 billet aluminium for superior corrosion and fatigue resistance.
Made from a billet bar and fully machined in a single process in a CNC machine.
When using 45° Fittings they will point straight.
Black hard anodised aluminium construction (Also available in Blue & Red anodised finish).
Y PIECE -8 FEMALE 2x -8 MALE
Speedflow -8AN Female Swivel Nut to -8AN Male Y Adapter Fitting.
Manufactured from marine quality 6061-T6 billet aluminium for superior corrosion and fatigue resistance.
Made from a billet bar and fully machined in a single process in a CNC machine.
When using 45° Fittings they will point straight.
Red & Blue hard anodised aluminium construction (Also available in Black anodised finish).
Y PIECE -8 FEMALE 2x -8 MALE
Speedflow -8AN Female Swivel Nut to -8AN Male Y Adapter Fitting.
Manufactured from marine quality 6061-T6 billet aluminium for superior corrosion and fatigue resistance.
Made from a billet bar and fully machined in a single process in a CNC machine.
When using 45° Fittings they will point straight.
Black hard anodised aluminium construction (Also available in Blue & Red anodised finish).
Y PIECE -10 FEMALE 2x -10 MALE
Speedflow -10AN Female Swivel Nut to -10AN Male Y Adapter Fitting.
Manufactured from marine quality 6061-T6 billet aluminium for superior corrosion and fatigue resistance.
Made from a billet bar and fully machined in a single process in a CNC machine.
When using 45° Fittings they will point straight.
Red & Blue hard anodised aluminium construction (Also available in Black anodised finish).
Y PIECE -10 FEMALE 2x -10 MALE
Speedflow -10AN Female Swivel Nut to -10AN Male Y Adapter Fitting.
Manufactured from marine quality 6061-T6 billet aluminium for superior corrosion and fatigue resistance.
Made from a billet bar and fully machined in a single process in a CNC machine.
When using 45° Fittings they will point straight.
Black hard anodised aluminium construction (Also available in Red & Blue anodised finish).
Y PIECE -12 FEMALE 2x -12 MALE
Speedflow -12AN Female Swivel Nut to -12AN Male Y Adapter Fitting.
Manufactured from marine quality 6061-T6 billet aluminium for superior corrosion and fatigue resistance.
Made from a billet bar and fully machined in a single process in a CNC machine.
When using 45° Fittings they will point straight.
Red & Blue hard anodised aluminium construction (Also available in Black anodised finish).
Y PIECE -12 FEMALE 2x -12 MALE
Speedflow -12AN Female Swivel Nut to -12AN Male Y Adapter Fitting.
Manufactured from marine quality 6061-T6 billet aluminium for superior corrosion and fatigue resistance.
Made from a billet bar and fully machined in a single process in a CNC machine.
When using 45° Fittings they will point straight.
Black hard anodised aluminium construction (Also available in Red & Blue anodised finish).
METRIC CAP M14 x 1.5
Speedflow M14 x 1.5 Female Cap Adapter.
Manufactured from marine quality 6061 billet Aluminium for superior corrosion and fatigue resistance.
Black hard anodised aluminium construction.
This is a unique cap for some European Fuel & Oil Systems found in Porsche & BMW's.
M12x1.5 FEM SWIVEL TO -6 MALE
Speedflow M12 x 1.5 Inverted/Convex Seal Female Swivel Nut to -6AN Male Flare Adapter.
Manufactured from marine quality 6061 billet Aluminium for superior corrosion and fatigue resistance.
Black hard anodised aluminium construction.
Will require a Concave Seat to Seal.
M14x1.5 FEM SWIVEL TO -6 MALE
Speedflow M14 x 1.5 Inverted/Convex Seal Female Swivel Nut to -6AN Male Flare Adapter.
Manufactured from marine quality 6061 billet Aluminium for superior corrosion and fatigue resistance.
Black hard anodised aluminium construction.
Will require a Concave Seat to Seal.
M10 x 1.0 MALE TO 5/16" TAIL
Speedflow Straight Metric M10 x 1.0 to 5/16" / 0.312" / 7.93mm Barb Push On Hose Fitting.
Manufactured from marine quality 6061-T6 billet aluminium for superior corrosion and fatigue resistance.
Black hard anodised aluminium construction.
Compatible with 400, 444, 485 & 598 Series Push On Hose.
Metric Thread seals with a Crush Washer.
A hose clamp is required to secure the hose for correct use.
M10 x 1.0 MALE TO 3/8" TAIL
Speedflow Straight Metric M10 x 1.0 to 3/8" / 0.375" / 9.52mm Barb Push On Hose Fitting.
Manufactured from marine quality 6061-T6 billet aluminium for superior corrosion and fatigue resistance.
Black hard anodised aluminium construction.
Compatible with 400, 444, 485 & 598 Series Push On Hose.
Metric Thread seals with a Crush Washer.
A hose clamp is required to secure the hose for correct use.
M10 x 1.0 MALE TO 1/2" TAIL
Speedflow Straight Metric M10 x 1.0 to 1/2" / 0.500" / 12.70mm Barb Push On Hose Fitting.
Manufactured from marine quality 6061-T6 billet aluminium for superior corrosion and fatigue resistance.
Black hard anodised aluminium construction.
Compatible with 400, 444, 485 & 598 Series Push On Hose.
Metric Thread seals with a Crush Washer.
A hose clamp is required to secure the hose for correct use.
M12 x 1.5 MALE TO 5/16" TAIL
Speedflow Straight Metric M12 x 1.5 to 5/16" / 0.312" / 7.93mm Barb Push On Hose Fitting.
Manufactured from marine quality 6061-T6 billet aluminium for superior corrosion and fatigue resistance.
Black hard anodised aluminium construction.
Compatible with 400, 444, 485 & 598 Series Push On Hose.
Metric Thread seals with a Crush Washer.
A hose clamp is required to secure the hose for correct use.
M12 x 1.5 MALE TO 3/8" TAIL
Speedflow Straight Metric M12 x 1.5 to 3/8" / 0.375" / 9.52mm Barb Push On Hose Fitting.
Manufactured from marine quality 6061-T6 billet aluminium for superior corrosion and fatigue resistance.
Black hard anodised aluminium construction.
Compatible with 400, 444, 485 & 598 Series Push On Hose.
Metric Thread seals with a Crush Washer.
A hose clamp is required to secure the hose for correct use.
M12 x 1.5 MALE TO 1/2" TAIL
Speedflow Straight Metric M12 x 1.5 to 1/2" / 0.500" / 12.70mm Barb Push On Hose Fitting.
Manufactured from marine quality 6061-T6 billet aluminium for superior corrosion and fatigue resistance.
Black hard anodised aluminium construction.
Compatible with 400, 444, 485 & 598 Series Push On Hose.
Metric Thread seals with a Crush Washer.
A hose clamp is required to secure the hose for correct use.
1/16" NPT to 1/4" HOSE TAIL
Speedflow Straight 1/16" NPT to 1/4" / 0.250" / 6.35mm Barb Push On Hose Fitting.
Manufactured from marine quality 6061-T6 billet aluminium for superior corrosion and fatigue resistance.
Blue hard anodised aluminium construction (Also available in Black anodised finish).
Compatible with 444 & 485 Series Push On Hose.
NPT Thread seals on a Taper with Thread Tape or Pipe
A hose clamp is required to secure the hose for correct use.
1/16" NPT to 1/4" HOSE TAIL
Speedflow Straight 1/16" NPT to 1/4" / 0.250" / 6.35mm Barb Push On Hose Fitting.
Manufactured from marine quality 6061-T6 billet aluminium for superior corrosion and fatigue resistance.
Black hard anodised aluminium construction (Also available in Blue anodised finish).
Compatible with 444 & 485 Series Push On Hose.
NPT Thread seals on a Taper with Thread Tape or Pipe
A hose clamp is required to secure the hose for correct use.
1/8" NPT to 3/16" HOSE TAIL
Speedflow Straight 1/8" NPT to 3/16" / 0.187" / 4.76mm Barb Push On Hose Fitting. Manufactured from marine quality 6061-T6 billet aluminium for superior corrosion and fatigue resistance.
Blue hard anodised aluminium construction (Also available in Black anodised finish).
Compatible with 444 & 485 Series Push On Hose.
NPT Thread seals on a Taper with Thread Tape or Pipe Sealant
A hose clamp is required to secure the hose for correct use.
1/8" NPT to 3/16" HOSE TAIL
Speedflow Straight 1/8" NPT to 3/16" / 0.187" / 4.76mm Barb Push On Hose Fitting.
Manufactured from marine quality 6061-T6 billet aluminium for superior corrosion and fatigue resistance.
Black hard anodised aluminium construction (Also available in Blue anodised finish).
Compatible with 444 & 485 Series Push On Hose.
NPT Thread seals on a Taper with Thread Tape or Pipe Sealant
A hose clamp is required to secure the hose for correct use.
1/8" NPT to 1/4" HOSE TAIL
Speedflow Straight 1/8" NPT to 1/4" / 0.250" / 6.35mm Barb Push On Hose Fitting.
Manufactured from marine quality 6061-T6 billet aluminium for superior corrosion and fatigue resistance.
Blue hard anodised aluminium construction (Also available in Black anodised finish).
Compatible with 444 & 485 Series Push On Hose.
NPT Thread seals on a Taper with Thread Tape or Pipe Sealant
A hose clamp is required to secure the hose for correct use.
1/8" NPT to 1/4" HOSE TAIL
Speedflow Straight 1/8" NPT to 1/4" / 0.250" / 6.35mm Barb Push On Hose Fitting.
Manufactured from marine quality 6061-T6 billet aluminium for superior corrosion and fatigue resistance.
Black hard anodised aluminium construction (Also available in Blue anodised finish).
Compatible with 444 & 485 Series Push On Hose.
NPT Thread seals on a Taper with Thread Tape or Pipe Sealant
A hose clamp is required to secure the hose for correct use.
1/8" NPT to 5/16" HOSE TAIL
Speedflow Straight 1/8" NPT to 5/16" / 0.312" / 7.93mm Barb Push On Hose Fitting.
Manufactured from marine quality 6061-T6 billet aluminium for superior corrosion and fatigue resistance.
Blue hard anodised aluminium construction (Also available in Black anodised finish).
Compatible with 444 & 485 Series Push On Hose.
NPT Thread seals on a Taper with Thread Tape or Pipe Sealant
A hose clamp is required to secure the hose for correct use.
1/8" NPT to 5/16" HOSE TAIL
Speedflow Straight 1/8" NPT to 5/16" / 0.312" / 7.93mm Barb Push On Hose Fitting.
Manufactured from marine quality 6061-T6 billet aluminium for superior corrosion and fatigue resistance.
Black hard anodised aluminium construction (Also available in Blue anodised finish).
Compatible with 444 & 485 Series Push On Hose.
NPT Thread seals on a Taper with Thread Tape or Pipe Sealant
A hose clamp is required to secure the hose for correct use.
1/8" NPT to 3/8" HOSE TAIL
Speedflow Straight 1/8" NPT to 3/8" / 0.375" / 9.52mm Barb Push On Hose Fitting.
Manufactured from marine quality 6061-T6 billet aluminium for superior corrosion and fatigue resistance.
Blue hard anodised aluminium construction (Also available in Black anodised finish).
Compatible with 444 & 485 Series Push On Hose.
NPT Thread seals on a Taper with Thread Tape or Pipe Sealant
A hose clamp is required to secure the hose for correct use.
1/8" NPT to 3/8" HOSE TAIL
Speedflow Straight 1/8" NPT to 3/8" / 0.375" / 9.52mm Barb Push On Hose Fitting.
Manufactured from marine quality 6061-T6 billet aluminium for superior corrosion and fatigue resistance.
Black hard anodised aluminium construction (Also available in Blue anodised finish).
Compatible with 444 & 485 Series Push On Hose.
NPT Thread seals on a Taper with Thread Tape or Pipe Sealant
A hose clamp is required to secure the hose for correct use.
3/8" NPT to 5/16" HOSE TAIL
Speedflow Straight 3/8" NPT to 5/16" / 0.312" / 7.93mm Barb Push On Hose Fitting.
Manufactured from marine quality 6061-T6 billet aluminium for superior corrosion and fatigue resistance.
Blue hard anodised aluminium construction (Also available in Black anodised finish).
Compatible with 444 & 485 Series Push On Hose.
NPT Thread seals on a Taper with Thread Tape or Pipe Sealant
A hose clamp is required to secure the hose for correct use.
3/8" NPT to 5/16" HOSE TAIL
Speedflow Straight 3/8" NPT to 5/16" / 0.312" / 7.93mm Barb Push On Hose Fitting.
Manufactured from marine quality 6061-T6 billet aluminium for superior corrosion and fatigue resistance.
Black hard anodised aluminium construction (Also available in Blue anodised finish).
Compatible with 444 & 485 Series Push On Hose.
NPT Thread seals on a Taper with Thread Tape or Pipe Sealant
A hose clamp is required to secure the hose for correct use.
3/8" NPT to 3/8" HOSE TAIL
Speedflow Straight 3/8" NPT to 3/8" / 0.375" / 9.52mm Barb Push On Hose Fitting.
Manufactured from marine quality 6061-T6 billet aluminium for superior corrosion and fatigue resistance.
Blue hard anodised aluminium construction (Also available in Black anodised finish).
Compatible with 444 & 485 Series Push On Hose.
NPT Thread seals on a Taper with Thread Tape or Pipe Sealant
A hose clamp is required to secure the hose for correct use.
3/8" NPT to 3/8" HOSE TAIL
Speedflow Straight 3/8" NPT to 3/8" / 0.375" / 9.52mm Barb Push On Hose Fitting.
Manufactured from marine quality 6061-T6 billet aluminium for superior corrosion and fatigue resistance.
Black hard anodised aluminium construction (Also available in Blue anodised finish).
Compatible with 444 & 485 Series Push On Hose.
NPT Thread seals on a Taper with Thread Tape or Pipe Sealant
A hose clamp is required to secure the hose for correct use.
3/8" NPT to 1/2" HOSE TAIL
Speedflow Straight 3/8" NPT to 1/2" / 0.500" / 12.70mm Barb Push On Hose Fitting.
Manufactured from marine quality 6061-T6 billet aluminium for superior corrosion and fatigue resistance.
Blue hard anodised aluminium construction (Also available in Black anodised finish).
Compatible with 444 & 485 Series Push On Hose.
NPT Thread seals on a Taper with Thread Tape or Pipe Sealant
A hose clamp is required to secure the hose for correct use
3/8" NPT to 1/2" HOSE TAIL
Speedflow Straight 3/8" NPT to 1/2" / 0.500" / 12.70mm Barb Push On Hose Fitting.
Manufactured from marine quality 6061-T6 billet aluminium for superior corrosion and fatigue resistance.
Black hard anodised aluminium construction (Also available in Blue anodised finish).
Compatible with 444 & 485 Series Push On Hose.
NPT Thread seals on a Taper with Thread Tape or Pipe Sealant
A hose clamp is required to secure the hose for correct use
WELD ON RADIATOR NECK - SMALL
Speedflow Billet Aluminium Weld On Radiator Neck.
Manufactured from marine quality 6061-T6 billet aluminium for superior corrosion and fatigue resistance.
Size: Neck Inner Diameter = 32mm.
Neck Outer Diameter = 43mm.
Suit Small Japanese Style Caps .
Great for Custom Radiators, Overflow Tanks & Expansion Tanks.
WELD ON RADIATOR NECK - LARGE
Speedflow Billet Aluminium Weld On Radiator Neck.
Manufactured from marine quality 6061-T6 billet aluminium for superior corrosion and fatigue resistance.
Size: Neck Inner Diameter = 40mm.
Neck Outer Diameter = 57mm.
Suit Large Regular Style Caps.
Great for Custom Radiators, Overflow Tanks & Expansion Tanks.
-8 FEM TURBO FLANGE 38-44mm
Speedflow -8 ORB / O-ring Boss Port Thread Turbo Oil Drain Flange with 38-44mm Slotted Hole Centers.
SEALING: Includes a silicone sealing o-ring.
Manufactured from marine quality 6061-T6 billet aluminium for superior corrosion and fatigue resistance.
Flange is hard anodised in Speedflow's Natural finish.
Will fit the Following Turbos GT2554R, GT2560R, GT2860RS, GT2871R, GT30, GT3071R, GT3082R, GT35R, GT3582R & T04Z. May also fit more turbos please always check your turbo drain bolt hole centres.
-10 FEM TURBO FLANGE 52mm
Speedflow -10 ORB / O-ring Boss Port Thread Turbo Oil Drain Flange with 52mm Hole Centers.
SEALING: Includes a silicone sealing o-ring.
Manufactured from marine quality 6061-T6 billet aluminium for superior corrosion and fatigue resistance.
Flange is hard anodised in Speedflow's Natural finish.
Will fit the Following Turbos T3, T4, T04Z, GT37, GT40, GT42,GT45, GT47, GT55, GTX Series. May also fit more turbos please always check your turbo drain bolt hole centers.
-6 MALE TO 5/16" TUBE ADAPTER
Speedflow -6AN Male to 5/16" Hard Line Compression Olive Adapter Fitting.
Manufactured from marine quality 6061-T6 billet aluminium for superior corrosion and fatigue resistance.
Red & Blue hard anodised aluminium construction (Also available in Black anodised finish).
This fitting does not require you to flare your hard line you simply slip on the Tube Nut (RED) then fit the Compression Olive followed by the Tube Adapter (Blue) simply tighten the Tube Nut while holding Tube Adapter. The olive will compress on to the pipe creating a seal which has been tested on stainless steel pipe up to 300psi.
Installation Tip: For the best seal it is recommended to have the olive placed over a very straight and round section of pipe. The olive is also a tight fit which means any flared ends need to be removed with a pipe cutter.
-6 MALE TO 5/16" TUBE ADAPTER
Speedflow -6AN Male to 5/16" Hard Line Compression Olive Adapter Fitting.
Manufactured from marine quality 6061-T6 billet aluminium for superior corrosion and fatigue resistance.
Black hard anodised aluminium construction (Also available in red/blue anodised finish).
This fitting does not require you to flare your hard line you simply slip on the Tube Nut (RED) then fit the Compression Olive followed by the Tube Adapter (Blue) simply tighten the Tube Nut while holding Tube Adapter. The olive will compress on to the pipe creating a seal which has been tested on stainless steel pipe up to 300psi.
Installation Tip: For the best seal it is recommended to have the olive placed over a very straight and round section of pipe. The olive is also a tight fit which means any flared ends need to be removed with a pipe cutter.
-6 MALE TO 3/8" TUBE ADAPTER
Speedflow -6AN Male to 3/8" Hard Line Compression Olive Adapter Fitting.
Manufactured from marine quality 6061-T6 billet aluminium for superior corrosion and fatigue resistance.
Red & Blue hard anodised aluminium construction (Also available in Black anodised finish).
This fitting does not require you to flare your hard line you simply slip on the Tube Nut (RED) then fit the Compression Olive followed by the Tube Adapter (Blue) simply tighten the Tube Nut while holding Tube Adapter. The olive will compress on to the pipe creating a seal which has been tested on stainless steel pipe up to 300psi.
Installation Tip: For the best seal it is recommended to have the olive placed over a very straight and round section of pipe. The olive is also a tight fit which means any flared ends need to be removed with a pipe cutter.
-6 MALE TO 3/8" TUBE ADAPTER
Speedflow -6AN Male to 3/8" Hard Line Compression Olive Adapter Fitting.
Manufactured from marine quality 6061-T6 billet aluminium for superior corrosion and fatigue resistance.
Black hard anodised aluminium construction (Also available in Blue/Red anodised finish).
This fitting does not require you to flare your hard line you simply slip on the Tube Nut (RED) then fit the Compression Olive followed by the Tube Adapter (Blue) simply tighten the Tube Nut while holding Tube Adapter. The olive will compress on to the pipe creating a seal which has been tested on stainless steel pipe up to 300psi.
Installation Tip: For the best seal it is recommended to have the olive placed over a very straight and round section of pipe. The olive is also a tight fit which means any flared ends need to be removed with a pipe cutter.
-8 MALE TO 1/2" TUBE ADAPTER
ITEM INFORMATION:
Speedflow -8AN Male to 1/2" Hard Line Compression Olive Adapter Fitting.
Manufactured from marine quality 6061-T6 billet aluminium for superior corrosion and fatigue resistance.
Red & Blue hard anodised aluminium construction (Also available in Black anodised finish).
This fitting does not require you to flare your hard line you simply slip on the Tube Nut (RED) then fit the Compression Olive followed by the Tube Adapter (Blue) simply tighten the Tube Nut while holding Tube Adapter. The olive will compress on to the pipe creating a seal which has been tested on stainless steel pipe up to 300psi.
Installation Tip: For the best seal it is recommended to have the olive placed over a very straight and round section of pipe. The olive is also a tight fit which means any flared ends need to be removed with a pipe cutter.
-8 MALE TO 1/2" TUBE ADAPTER
ITEM INFORMATION:
Speedflow -8AN Male to 1/2" Hard Line Compression Olive Adapter Fitting.
Manufactured from marine quality 6061-T6 billet aluminium for superior corrosion and fatigue resistance.
Black hard anodised aluminium construction (Also available in Blue & Red anodised finish).
Installation Tip: For the best seal it is recommended to have the olive placed over a very straight and round section of pipe. The olive is also a tight fit which means any flared ends need to be removed with a pipe cutter.
-10 MALE TO 5/8" TUBE ADAPTER
Speedflow -10AN Male to 5/8" Hard Line Compression Olive Adapter Fitting.
Manufactured from marine quality 6061-T6 billet aluminium for superior corrosion and fatigue resistance.
Red & Blue hard anodised aluminium construction (Also available in Black anodised finish).
This fitting does not require you to flare your hard line you simply slip on the Tube Nut (RED) then fit the Compression Olive followed by the Tube Adapter (Blue) simply tighten the Tube Nut while holding Tube Adapter. The olive will compress on to the pipe creating a seal which has been tested on stainless steel pipe up to 300psi.
Installation Tip: For the best seal it is recommended to have the olive placed over a very straight and round section of pipe. The olive is also a tight fit which means any flared ends need to be removed with a pipe cutter.
-10 MALE TO 5/8" TUBE ADAPTER
Speedflow -10AN Male to 5/8" Hard Line Compression Olive Adapter Fitting.
Manufactured from marine quality 6061-T6 billet aluminium for superior corrosion and fatigue resistance.
Black anodised finish.
This fitting does not require you to flare your hard line you simply slip on the Tube Nut (RED) then fit the Compression Olive followed by the Tube Adapter (Blue) simply tighten the Tube Nut while holding Tube Adapter. The olive will compress on to the pipe creating a seal which has been tested on stainless steel pipe up to 300psi.
Installation Tip: For the best seal it is recommended to have the olive placed over a very straight and round section of pipe. The olive is also a tight fit which means any flared ends need to be removed with a pipe cutter.
-10 MALE TO 3/4" TUBE ADAPTER
Speedflow -10AN Male to 3/4" Hard Line Compression Olive Adapter Fitting.
Manufactured from marine quality 6061-T6 billet aluminium for superior corrosion and fatigue resistance.
Red & Blue hard anodised aluminium construction (Also available in Black anodised finish).
This fitting does not require you to flare your hard line you simply slip on the Tube Nut (RED) then fit the Compression Olive followed by the Tube Adapter (Blue) simply tighten the Tube Nut while holding Tube Adapter. The olive will compress on to the pipe creating a seal which has been tested on stainless steel pipe up to 300psi.
Installation Tip: For the best seal it is recommended to have the olive placed over a very straight and round section of pipe. The olive is also a tight fit which means any flared ends need to be removed with a pipe cutter.
-10 MALE TO 3/4" TUBE ADAPTER
Speedflow -10AN Male to 3/4" Hard Line Compression Olive Adapter Fitting.
Manufactured from marine quality 6061-T6 billet aluminium for superior corrosion and fatigue resistance.
Black anodised finish.
This fitting does not require you to flare your hard line you simply slip on the Tube Nut then fit the Compression Olive followed by the Tube Adapter simply tighten the Tube Nut while holding Tube Adapter. The olive will compress on to the pipe creating a seal which has been tested on stainless steel pipe up to 300psi.
Installation Tip: For the best seal it is recommended to have the olive placed over a very straight and round section of pipe. The olive is also a tight fit which means any flared ends need to be removed with a pipe cutter.
-12 MALE TO 3/4" TUBE ADAPTER
Speedflow -12AN Male to 3/4" Hard Line Compression Olive Adapter Fitting.
Manufactured from marine quality 6061-T6 billet aluminium for superior corrosion and fatigue resistance.
Red & Blue hard anodised aluminium construction (Also available in Black anodised finish).
This fitting does not require you to flare your hard line you simply slip on the Tube Nut (RED) then fit the Compression Olive followed by the Tube Adapter (Blue) simply tighten the Tube Nut while holding Tube Adapter. The olive will compress on to the pipe creating a seal which has been tested on stainless steel pipe up to 300psi.
Installation Tip: For the best seal it is recommended to have the olive placed over a very straight and round section of pipe. The olive is also a tight fit which means any flared ends need to be removed with a pipe cutter.
-12 MALE TO 3/4" TUBE ADAPTER
Speedflow -12AN Male to 3/4" Hard Line Compression Olive Adapter Fitting.
Manufactured from marine quality 6061-T6 billet aluminium for superior corrosion and fatigue resistance.
Black anodised finish.
This fitting does not require you to flare your hard line you simply slip on the Tube Nut (RED) then fit the Compression Olive followed by the Tube Adapter (Blue) simply tighten the Tube Nut while holding Tube Adapter. The olive will compress on to the pipe creating a seal which has been tested on stainless steel pipe up to 300psi.
Installation Tip: For the best seal it is recommended to have the olive placed over a very straight and round section of pipe. The olive is also a tight fit which means any flared ends need to be removed with a pipe cutter.
-6 FEMALE TO 5/16" TUBE ADAPTER
Speedflow -6AN Female Swivel Nut to 5/16" Hard Line Compression Olive Adapter Fitting.
Manufactured from marine quality 6061-T6 billet aluminium for superior corrosion and fatigue resistance.
Red & Blue hard anodised aluminium construction (Also available in Black anodised finish).
This fitting does not require you to flare your hard line you simply slip on the Tube Nut (RED) then fit the Compression Olive followed by the Tube Adapter (Blue) simply tighten the Tube Nut while holding Tube Adapter. The olive will compress on to the pipe creating a seal which has been tested on stainless steel pipe up to 300psi.
Installation Tip: For the best seal it is recommended to have the olive placed over a very straight and round section of pipe. The olive is also a tight fit which means any flared ends need to be removed with a pipe cutter.
-6 FEMALE TO 5/16" TUBE ADAPTER
Speedflow -6AN Female Swivel Nut to 5/16" Hard Line Compression Olive Adapter Fitting.
Manufactured from marine quality 6061-T6 billet aluminium for superior corrosion and fatigue resistance.
Black anodised finish.
This fitting does not require you to flare your hard line you simply slip on the Tube Nut (RED) then fit the Compression Olive followed by the Tube Adapter (Blue) simply tighten the Tube Nut while holding Tube Adapter. The olive will compress on to the pipe creating a seal which has been tested on stainless steel pipe up to 300psi.
Installation Tip: For the best seal it is recommended to have the olive placed over a very straight and round section of pipe. The olive is also a tight fit which means any flared ends need to be removed with a pipe cutter.
-6 FEMALE TO 3/8" TUBE ADAPTER
Speedflow -6AN Female Swivel Nut to 3/8" Hard Line Compression Olive Adapter Fitting.
Manufactured from marine quality 6061-T6 billet aluminium for superior corrosion and fatigue resistance.
Red & Blue hard anodised aluminium construction (Also available in Black anodised finish).
This fitting does not require you to flare your hard line you simply slip on the Tube Nut (RED) then fit the Compression Olive followed by the Tube Adapter (Blue) simply tighten the Tube Nut while holding Tube Adapter. The olive will compress on to the pipe creating a seal which has been tested on stainless steel pipe up to 300psi.
Installation Tip: For the best seal it is recommended to have the olive placed over a very straight and round section of pipe. The olive is also a tight fit which means any flared ends need to be removed with a pipe cutter.
-6 FEMALE TO 3/8" TUBE ADAPTER
Speedflow -6AN Female Swivel Nut to 3/8" Hard Line Compression Olive Adapter Fitting.
Manufactured from marine quality 6061-T6 billet aluminium for superior corrosion and fatigue resistance.
Black anodised finish.
This fitting does not require you to flare your hard line you simply slip on the Tube Nut (RED) then fit the Compression Olive followed by the Tube Adapter (Blue) simply tighten the Tube Nut while holding Tube Adapter. The olive will compress on to the pipe creating a seal which has been tested on stainless steel pipe up to 300psi.
Installation Tip: For the best seal it is recommended to have the olive placed over a very straight and round section of pipe. The olive is also a tight fit which means any flared ends need to be removed with a pipe cutter.
-8 FEMALE TO 1/2" TUBE ADAPTER
Speedflow -8AN Female Swivel Nut to 1/2" Hard Line Compression Olive Adapter Fitting.
Manufactured from marine quality 6061-T6 billet aluminium for superior corrosion and fatigue resistance.
Red & Blue hard anodised aluminium construction (Also available in Black anodised finish).
This fitting does not require you to flare your hard line you simply slip on the Tube Nut (RED) then fit the Compression Olive followed by the Tube Adapter (Blue) simply tighten the Tube Nut while holding Tube Adapter. The olive will compress on to the pipe creating a seal which has been tested on stainless steel pipe up to 300psi.
Installation Tip: For the best seal it is recommended to have the olive placed over a very straight and round section of pipe. The olive is also a tight fit which means any flared ends need to be removed with a pipe cutter.
-8 FEMALE TO 1/2" TUBE ADAPTER
Speedflow -8AN Female Swivel Nut to 1/2" Hard Line Compression Olive Adapter Fitting.
Manufactured from marine quality 6061-T6 billet aluminium for superior corrosion and fatigue resistance.
Black hard anodised aluminium construction (Also available in Blue & Red anodised finish).
This fitting does not require you to flare your hard line you simply slip on the Tube Nut (RED) then fit the Compression Olive followed by the Tube Adapter (Blue) simply tighten the Tube Nut while holding Tube Adapter. The olive will compress on to the pipe creating a seal which has been tested on stainless steel pipe up to 300psi.
Installation Tip: For the best seal it is recommended to have the olive placed over a very straight and round section of pipe. The olive is also a tight fit which means any flared ends need to be removed with a pipe cutter.
-10 FEMALE TO 5/8" TUBE ADAPTER
Speedflow -10AN Female Swivel Nut to 5/8" Hard Line Compression Olive Adapter Fitting.
Manufactured from marine quality 6061-T6 billet aluminium for superior corrosion and fatigue resistance.
Red & Blue hard anodised aluminium construction (Also available in Black anodised finish).
This fitting does not require you to flare your hard line you simply slip on the Tube Nut (RED) then fit the Compression Olive followed by the Tube Adapter (Blue) simply tighten the Tube Nut while holding Tube Adapter. The olive will compress on to the pipe creating a seal which has been tested on stainless steel pipe up to 300psi.
Installation Tip: For the best seal it is recommended to have the olive placed over a very straight and round section of pipe. The olive is also a tight fit which means any flared ends need to be removed with a pipe cuttert.
-10 FEMALE TO 5/8" TUBE ADAPTER
Speedflow -10AN Female Swivel Nut to 5/8" Hard Line Compression Olive Adapter Fitting.
Manufactured from marine quality 6061-T6 billet aluminium for superior corrosion and fatigue resistance.
Black anodised finish.
This fitting does not require you to flare your hard line you simply slip on the Tube Nut then fit the Compression Olive followed by the Tube Adapter simply tighten the Tube Nut while holding Tube Adapter. The olive will compress on to the pipe creating a seal which has been tested on stainless steel pipe up to 300psi.
Installation Tip: For the best seal it is recommended to have the olive placed over a very straight and round section of pipe. The olive is also a tight fit which means any flared ends need to be removed with a pipe cuttert.
3/8"NPT TO 5/8" TEMP PROBE
Made in Australia since 1983
Speedflow 3/8" NPT Male to 5/8"-18 Female Reducer Bush.
Mechanical Water Temperature Gauges which use a 5/8"-18 thread can be adpated to 3/8"NPT ports with this adapter.
Manufactured from marine quality 6061-T6 billet aluminium superior corrosion fatigue resistance.
Blue hard anodised aluminium construction (Also available in Black anodised finish).
3/8"NPT TO 5/8" TEMP PROBE
Made in Australia since 1983
Speedflow 3/8" NPT Male to 5/8"-18 Female Reducer Bush.
Mechanical Water Temperature Gauges which use a 5/8"-18 thread can be adpated to 3/8"NPT ports with this adapter.
Manufactured from marine quality 6061-T6 billet aluminium superior corrosion fatigue resistance.
Black hard anodised aluminium construction (Also available in Blue anodised finish).
1/2"NPT TO 5/8" TEMP PROBE
Speedflow 1/2" NPT Male to 5/8"-18 Female Reducer Bush.
Mechanical Water Temperature Gauges which use a 5/8"-18 thread can be adpated to 1/2"NPT ports with this adapter.
Manufactured from marine quality 6061-T6 billet aluminium for superior corrosion and fatigue resistance.
Blue hard anodised aluminium construction (Also available in Black anodised finish).
NPT Thread seals on a Taper with Thread Tape or Pipe Sealant
1/2"NPT TO 5/8" TEMP PROBE
Speedflow 1/2" NPT Male to 5/8"-18 Female Reducer Bush.
Mechanical Water Temperature Gauges which use a 5/8"-18 thread can be adpated to 1/2"NPT ports with this adapter.
Manufactured from marine quality 6061-T6 billet aluminium for superior corrosion and fatigue resistance.
Black hard anodised aluminium construction (Also available in Blue anodised finish).
NPT Thread seals on a Taper with Thread Tape or Pipe Sealant
-6 MALE TO 7/8"-20 HOLLEY
Size : -6
Thread : 7/8"-20
Overall Length: 40.4 mm
Male Adapters
Made in Australia
Anodised Blue
Suit all Holley centre hung fuel bowls
Speedflow has a complete range of Carburettor fuel bowl inlet fittings adapters almost carburettor.
Speedflow's range includes a full range of male adapters & tube extensions Holley & Demon.
Great if you are making a custom fuel rail or adapting to a female tee or fitting
-6 MALE TO 7/8"-20 HOLLEY
Size : -6
Thread : 7/8"-20
Overall Length: 40.4 mm
Male Adapters
Made in Australia
Anodised Black
Suit all Holley centre hung fuel bowls
Speedflow has a complete range of Carburettor fuel bowl inlet fittings adapters almost carburettor.
Speedflow's range includes a full range of male adapters & tube extensions Holley & Demon.
Great if you are making a custom fuel rail or adapting to a female tee or fitting
-8 MALE TO 7/8"-20 HOLLEY
Size : -8
Thread : 7/8"-20
Overall Length: 44.5 mm
Male Adapters
Made in Australia
Anodised Blue or Black as standardSuit all Holley centre hung fuel bowls
Speedflow has a complete range of Carburettor fuel bowl inlet fittings adapters almost carburettor.
Speedflow's range includes a full range of male adapters & tube extensions Holley & Demon.
Great if you are making a custom fuel rail or adapting to a female tee or fitting
-8 MALE TO 7/8"-20 HOLLEY
Size : -8
Thread : 7/8"-20
Overall Length: 44.5 mm
Male Adapters
Made in Australia
Anodised Blue or Black as standardSuit all Holley centre hung fuel bowls
Speedflow has a complete range of Carburettor fuel bowl inlet fittings adapters almost carburettor.
Speedflow's range includes a full range of male adapters & tube extensions Holley & Demon.
Great if you are making a custom fuel rail or adapting to a female tee or fitting
-8 MALE TO 7/8"-20 HOLLEY LONG
Size : -8
Thread : 7/8”-20 Thread
Made in Australia
Anodised Blue or Black as standard
Speedflow has a complete range of Carburettor fuel bowl inlet fittings adapters almost carburettor.
Speedflow's range includes a full range of male adapters & tube extensions Holley & Demon.
Great if you are making a custom fuel rail or adapting to a female tee or fitting
-8 MALE TO 7/8"-20 HOLLEY LONG
Size : -8
Thread : 7/8”-20 Thread
Made in Australia
Anodised Blue or Black as standard
Speedflow has a complete range of Carburettor fuel bowl inlet fittings adapters almost carburettor.
Speedflow's range includes a full range of male adapters & tube extensions Holley & Demon.
Great if you are making a custom fuel rail or adapting to a female tee or fitting
-6 MALE 9/16"-24 HOLLEY/DEMON
Size : -6
Thread : 9/16"-24
Overall Length: 26.5 mm
Male Adapters
Made in Australia
Anodised Blue
Suit all Holley Side Hung fuel bowls & BG Demon
Speedflow has a complete range of Carburettor fuel bowl inlet fittings adapters almost carburettor.
Speedflow's range includes a full range of male adapters & tube extensions Holley & Demon.
Great if you are making a custom fuel rail or adapting to a female tee or fitting
-6 MALE 9/16"-24 HOLLEY/DEMON
Size : -6
Thread : 9/16"-24
Overall Length: 26.5 mm
Male Adapters
Made in Australia
Anodised Black
Suit all Holley Side Hung fuel bowls & BG Demon
Speedflow has a complete range of Carburettor fuel bowl inlet fittings adapters almost carburettor.
Speedflow's range includes a full range of male adapters & tube extensions Holley & Demon.
Great if you are making a custom fuel rail or adapting to a female tee or fitting
-8 MALE 9/16"-24 HOLLEY/DEMON
Speedflow Part No: 701-08
Size : -8
Thread : 9/16"-24
Overall Length: 23.6 mm
Male Adapters
Made in Australia
Anodised Blue or Black as standard
Suit all Holley Side Hung fuel bowls & BG Demon
Speedflow has a complete range of Carburettor fuel bowl inlet fittings adapters almost carburettor.
Speedflow's range includes a full range of male adapters & tube extensions Holley & Demon.
Great if you are making a custom fuel rail or adapting to a female tee or fitting
-8 MALE 9/16"-24 HOLLEY/DEMON
Speedflow Part No: 701-08
Size : -8
Thread : 9/16"-24
Overall Length: 23.6 mm
Male Adapters
Made in Australia
Anodised Blue or Black as standard
Suit all Holley Side Hung fuel bowls & BG Demon
Speedflow has a complete range of Carburettor fuel bowl inlet fittings adapters almost carburettor.
Speedflow's range includes a full range of male adapters & tube extensions Holley & Demon.
Great if you are making a custom fuel rail or adapting to a female tee or fitting
-8 MALE 9/16"-24 HOL/DEM LONG
eedflow Part No: 701-08-L
Size : -8
Thread : 9/16"-24
Overall Length: 82.5 mm
Male Adapters
Made in Australia
Anodised Blue or Black as standard
Suit all Holley Side Hung fuel bowls & BG Demon
Speedflow has a complete range of Carburettor fuel bowl inlet fittings adapters almost carburettor.
Speedflow's range includes a full range of male adapters & tube extensions Holley & Demon.
Great if you are making a custom fuel rail or adapting to a female tee or fitting
-8 MALE 9/16"-24 HOL/DEM LONG
eedflow Part No: 701-08-L
Size : -8
Thread : 9/16"-24
Overall Length: 82.5 mm
Male Adapters
Made in Australia
Anodised Blue or Black as standard
Suit all Holley Side Hung fuel bowls & BG Demon
Speedflow has a complete range of Carburettor fuel bowl inlet fittings adapters almost carburettor.
Speedflow's range includes a full range of male adapters & tube extensions Holley & Demon.
Great if you are making a custom fuel rail or adapting to a female tee or fitting
-6 MALE TO 7/16"-24 INVERTED
Made in Australia since 1983
Speedflow Size 6AN AN-6 Thread 7/16”-24 Inv Fuel Line Adapter .
Manufactured from marine quality 6061-T6 billet aluminium superior corrosion fatigue resistance
Blue and Black hard anodised aluminium construction
-6 MALE TO 7/16"-24 INVERTED
Made in Australia since 1983
Speedflow Size 6AN AN-6 Thread 7/16”-24 Inv Fuel Line Adapter .
Manufactured from marine quality 6061-T6 billet aluminium superior corrosion fatigue resistance
Black hard anodised aluminium construction
-6 MALE TO 1/2"-20 INVERTED
Made in Australia since 1983
Speedflow Size 6AN AN-6 Thread 1/2”-20 Inv Transmission & Fuel Line Adapter 703-06
Manufactured from marine quality 6061-T6 billet aluminium superior corrosion fatigue resistance
Blue and Black hard anodised aluminium construction
-6 MALE TO 1/2"-20 INVERTED
Made in Australia since 1983
Speedflow Size 6AN AN-6 Thread 1/2”-20 Inv Transmission & Fuel Line Adapter 703-06
Manufactured from marine quality 6061-T6 billet aluminium superior corrosion fatigue resistance
Black hard anodised aluminium construction
-8 MALE TO 1/2"-20 INVERTED
Made in Australia since 1983
Speedflow Size 8AN AN-8 Thread 1/2”-20 Inv Transmission & Fuel Line Adapter
Manufactured from marine quality 6061-T6 billet aluminium superior corrosion fatigue resistance
Blue and Black hard anodised aluminium construction
-8 MALE TO 1/2"-20 INVERTED
Made in Australia since 1983
Speedflow Size 8AN AN-8 Thread 1/2”-20 Inv Transmission & Fuel Line Adapter
Manufactured from marine quality 6061-T6 billet aluminium superior corrosion fatigue resistance
Black hard anodised aluminium construction
-6 MALE TO 5/8"-18 INVERTED
Made in Australia since 1983
Speedflow Size 6AN AN-6 Thread 5/8”-18 Inv Power Steer,Fuel & Oil Line Adapter
Manufactured from marine quality 6061-T6 billet aluminium superior corrosion fatigue resistance
Blue and Black hard anodised aluminium construction
-6 MALE TO 5/8"-18 INVERTED
Made in Australia since 1983
Speedflow Size 6AN AN-6 Thread 5/8”-18 Inv Power Steer,Fuel & Oil Line Adapter
Manufactured from marine quality 6061-T6 billet aluminium superior corrosion fatigue resistance
Black hard anodised aluminium construction
-8 MALE TO 5/8"-18 INVERTED
Made in Australia since 1983
Speedflow Size 8AN AN-8 Thread 5/8”-18 Inv Power Steer,Fuel & Oil Line Adapter
Manufactured from marine quality 6061-T6 billet aluminium superior corrosion fatigue resistance
Blue and Black hard anodised aluminium construction
-8 MALE TO 5/8"-18 INVERTED
Made in Australia since 1983
Speedflow Size 8AN AN-8 Thread 5/8”-18 Inv Power Steer,Fuel & Oil Line Adapter
Manufactured from marine quality 6061-T6 billet aluminium superior corrosion fatigue resistance
Blue and Black hard anodised aluminium construction
-6 MALE TO 11/16"-18 INVERTED
Made in Australia since 1983
Speedflow Size 6AN AN-6 Thread 11/16”-18 Inv Power Steer Lines Adapter
Manufactured from marine quality 6061-T6 billet aluminium superior corrosion fatigue resistance
Blue and Black hard anodised aluminium construction
-6 MALE TO 11/16"-18 INVERTED
Made in Australia since 1983
Speedflow Size 6AN AN-6 Thread 11/16”-18 Inv Power Steer Lines Adapter
Manufactured from marine quality 6061-T6 billet aluminium superior corrosion fatigue resistance
Black hard anodised aluminium construction
-6 MALE TO 5/8"-20 CARTER
Made in Australia since 1983
Speedflow 6 AN AN-6 Thread 5/8”-20 Washer Carter Carburettor Adapter
Manufactured from marine quality 6061-T6 billet aluminium superior corrosion fatigue resistance
Blue and Black hard anodised aluminium construction
-6 MALE TO 5/8"-20 CARTER
Made in Australia since 1983
Speedflow 6 AN AN-6 Thread 5/8”-20 Washer Carter Carburettor Adapter
Manufactured from marine quality 6061-T6 billet aluminium superior corrosion fatigue resistance
Black hard anodised aluminium construction
-10 MALE TO 3/4"-18 INVERTED
Made in Australia since 1983
Speedflow 10 AN AN-10 Thread 3/4”-18 Inv Chrysler Oil Adapter
Manufactured from marine quality 6061-T6 billet aluminium superior corrosion fatigue resistance
Blue and Black hard anodised aluminium construction
Speedflow part no : 707-10
-10 MALE TO 3/4"-18 INVERTED
Made in Australia since 1983
Speedflow 10 AN AN-10 Thread 3/4”-18 Inv Chrysler Oil Adapter
Manufactured from marine quality 6061-T6 billet aluminium superior corrosion fatigue resistance
Black hard anodised aluminium construction
Speedflow part no : 707-10
-10 PRESS IN ADAPTER FOR RB20
PLEASE READ BEFORE BUYING:
This will suit R32 Skyline RB20 Covers & R33 Skyline RB25 Covers please always check your cover inner diameter on RB25 engines as the R34 Skyline requires 708-10-02-BLK fitting.
Speedflow -10AN Male Flare to Nissan RB Series Valve Cover Breather Fitting.
Manufactured from marine quality 6061-T6 billet aluminium for superior corrosion and fatigue resistance.
Made from a billet rod and fully machined in a single process in a CNC machine.
Black hard anodised aluminium construction.
Simply remove the factory steel fitting and press this adapter in to allow the connection of braided ends.
Will fit Twin Cam RB20 & RB25 Series Engines covers with 15.8mm hole.
-10 PRESS IN ADAPTOR FOR NISSAN SR
RB25 BUYERS PLEASE READ:
This will suit R34 Skyline RB25 Covers please always check your cover inner diameter on RB25 engines as the R33 Skyline requires 708-10-01-BLK fitting.
Speedflow -10AN Male Flare to Nissan SR Series Valve Cover Breather Fitting.
Manufactured from marine quality 6061-T6 billet aluminium for superior corrosion and fatigue resistance.
Made from a billet rod and fully machined in a single process in a CNC machine.
Black hard anodised aluminium construction.
Simply remove the factory steel fitting and press this adapter in to allow the connection of braided ends.
Will fit Twin Cam SR20 Series Engines & Late Model RB25 Covers with 16.15mm hole (If hole Measures under 15.8mm use 708-10-01-BLK fitting)
-10 x M19 ADAPTER FOR RB30
Speedflow -10AN Male Flare to Nissan RB30 Series Valve Cover Breather Fitting.
Manufactured from marine quality 6061-T6 billet aluminium for superior corrosion and fatigue resistance.
Made from a billet rod and fully machined in a single process in a CNC machine.
Black hard anodised aluminium construction.
Simply allow the connection of braided ends with this unique adapter (requires thread sealant).
Will fit Single Cam RB30 Series Engines (May Also fit L26 & L28 Engines).
-10 PRESS IN ADAPTOR (25.4mm)
Speedflow -10AN Male Flare to 1" (25.4mm) Push in barb Valve Cover Breather Fittings.
Manufactured from marine quality 6061-T6 billet aluminium for superior corrosion and fatigue resistance.
Made from a billet rod and fully machined in a single process in a CNC machine.
Black hard anodised aluminium construction.
Allows the connection of braided ends with this unique adapter (requires rubber grommet with 1" ID).
Rubber grommet not included.
-12 PRESS IN ADAPTOR (25.4mm)
Speedflow -12AN Male Flare to 1" (25.4mm) Push in barb Valve Cover Breather Fitting.
Manufactured from marine quality 6061-T6 billet aluminium for superior corrosion and fatigue resistance.
Made from a billet rod and fully machined in a single process in a CNC machine.
Black hard anodised aluminium construction.
Allows the connection of braided ends with this unique adapter (requires rubber grommet with 1" ID).
Rubber grommet not included.
-6 FEMALE TO 7/8"-20 LONG
Size : -6
Thread : 7/8"-20
Male Adapters
Made in Australia
Anodised Blue
Suit all Holley centre hung fuel bowls
Speedflow has a complete range of Carburettor fuel bowl inlet fittings adapters almost carburettor.
Speedflow's range includes a full range of male adapters & tube extensions Holley & Demon.
Great if you are making a custom fuel rail or adapting to a female tee or fitting
-6 FEMALE TO 7/8"-20 SHORT
Size : -6
Thread : 7/8"-20
Male Adapters
Made in Australia
Anodised Blue
Suit all Holley centre hung fuel bowls
Speedflow has a complete range of Carburettor fuel bowl inlet fittings adapters almost carburettor.
Speedflow's range includes a full range of male adapters & tube extensions Holley & Demon.
Great if you are making a custom fuel rail or adapting to a female tee or fitting
-6 FEMALE TO 7/8"-20 SHORT
Size : -6
Thread : 7/8"-20
Male Adapters
Made in Australia
Anodised Black
Suit all Holley centre hung fuel bowls
Speedflow has a complete range of Carburettor fuel bowl inlet fittings adapters almost carburettor.
Speedflow's range includes a full range of male adapters & tube extensions Holley & Demon.
Great if you are making a custom fuel rail or adapting to a female tee or fitting
-6 FEMALE TO 7/8"-20 LONG
Size : -6
Thread : 7/8"-20
Male Adapters
Made in Australia
Anodised Black
Suit all Holley centre hung fuel bowls
Speedflow has a complete range of Carburettor fuel bowl inlet fittings adapters almost carburettor.
Speedflow's range includes a full range of male adapters & tube extensions Holley & Demon.
Great if you are making a custom fuel rail or adapting to a female tee or fitting
-8 FEMALE TO 7/8"-20 LONG
Size : -8
Thread : 7/8"-20
Male Adapters
Made in Australia
Anodised Blue
Suit all Holley centre hung fuel bowls
Speedflow has a complete range of Carburettor fuel bowl inlet fittings adapters almost carburettor.
Speedflow's range includes a full range of male adapters & tube extensions Holley & Demon.
Great if you are making a custom fuel rail or adapting to a female tee or fitting
-8 FEMALE TO 7/8"-20 LONG
Size : -8
Thread : 7/8"-20
Male Adapters
Made in Australia
Anodised Black
Suit all Holley centre hung fuel bowls
Speedflow has a complete range of Carburettor fuel bowl inlet fittings adapters almost carburettor.
Speedflow's range includes a full range of male adapters & tube extensions Holley & Demon.
Great if you are making a custom fuel rail or adapting to a female tee or fitting
-6 FEMALE TO 9/16"-24 LONG
Size : -6
Thread : 9/16"-24
Overall Length: 82.5 mm
Male Adapters
Made in Australia
Anodised Blue
Suit all Holley Side Hung fuel bowls & BG Demon
Speedflow has a complete range of Carburettor fuel bowl inlet fittings adapters almost carburettor.
Speedflow's range includes a full range of male adapters & tube extensions Holley & Demon.
Great if you are making a custom fuel rail or adapting to a female tee or fitting
-6 FEMALE TO 9/16"-24 LONG
Size : -6
Thread : 9/16"-24
Overall Length: 82.5 mm
Male Adapters
Made in Australia
Anodised Black
Suit all Holley Side Hung fuel bowls & BG Demon
Speedflow has a complete range of Carburettor fuel bowl inlet fittings adapters almost carburettor.
Speedflow's range includes a full range of male adapters & tube extensions Holley & Demon.
Great if you are making a custom fuel rail or adapting to a female tee or fitting
-8 FEMALE TO 9/16"-24 LONG
Size : -8
Thread : 9/16"-24
Overall Length: 79 mm
Male Adapters
Made in Australia
Anodised Blue
Suit all Holley Side Hung fuel bowls & BG Demon
Speedflow has a complete range of Carburettor fuel bowl inlet fittings adapters almost carburettor.
Speedflow's range includes a full range of male adapters & tube extensions Holley & Demon.
Great if you are making a custom fuel rail or adapting to a female tee or fitting
-8 FEMALE TO 9/16"-24 LONG
Size : -8
Thread : 9/16"-24
Overall Length: 79 mm
Male Adapters
Made in Australia
Anodised Black
Suit all Holley Side Hung fuel bowls & BG Demon
Speedflow has a complete range of Carburettor fuel bowl inlet fittings adapters almost carburettor.
Speedflow's range includes a full range of male adapters & tube extensions Holley & Demon.
Great if you are making a custom fuel rail or adapting to a female tee or fitting
-6 MALE TO 5/16" EFI TUBE ADAP
Speedflow EFI Fuel Rail/Line Adapter
To suit Fuel lines, Fuel Rails & Fuel Filters with 5/16" OD pipe and have the Quick Connect flare.
-6AN Male Flare easily adapts to Braided Hose Ends.
Make upgrading your OEM fuel lines easy with this simple Screw On Quick Connect Adapter.
Will suit most late model Holden, Ford & Import Fuel Systems with 5/16" line.
-6 MALE TO 5/16" EFI TUBE ADAP
Speedflow EFI Fuel Rail/Line Adapter
To suit Fuel lines, Fuel Rails & Fuel Filters with 5/16" OD pipe and have the Quick Connect flare.
-6AN Male Flare easily adapts to Braided Hose Ends.
Make upgrading your OEM fuel lines easy with this simple Screw On Quick Connect Adapter.
Will suit most late model Holden, Ford & Import Fuel Systems with 5/16" line.
-6 MALE TO 3/8" EFI TUBE ADAPT
Speedflow EFI Fuel Rail/Line Adapter –
To suit Fuel lines, Fuel Rails & Fuel Filters with 3/8" OD pipe and have the Quick Connect flare.
-6AN Male Flare easily adapts to Braided Hose Ends.
Make upgrading your OEM fuel lines easy with this simple Screw On Quick Connect Adapter.
Will suit most late model Holden, Ford & Import Fuel Systems with 3/8" line.
-6 MALE TO 3/8" EFI TUBE ADAPT
Speedflow EFI Fuel Rail/Line Adapter –
To suit Fuel lines, Fuel Rails & Fuel Filters with 3/8" OD pipe and have the Quick Connect flare.
-6AN Male Flare easily adapts to Braided Hose Ends.
Make upgrading your OEM fuel lines easy with this simple Screw On Quick Connect Adapter.
Will suit most late model Holden, Ford & Import Fuel Systems with 3/8" line.
-6 MALE TO 1/2" EFI TUBE ADAPT
Speedflow EFI Fuel Rail/Line Adapter –
To suit Fuel lines, Fuel Rails & Fuel Filters with 1/2" OD pipe and have the Quick Connect flare.
-6AN Male Flare easily adapts to Braided Hose Ends.
Make upgrading your OEM fuel lines easy with this simple Screw On Quick Connect Adapter.
Will suit most late model Holden, Ford & Import Fuel Systems with 1/2" line.
-6 MALE TO 1/2" EFI TUBE ADAPT
Speedflow EFI Fuel Rail/Line Adapter –
To suit Fuel lines, Fuel Rails & Fuel Filters with 1/2" OD pipe and have the Quick Connect flare.
-6AN Male Flare easily adapts to Braided Hose Ends.
Make upgrading your OEM fuel lines easy with this simple Screw On Quick Connect Adapter.
Will suit most late model Holden, Ford & Import Fuel Systems with 1/2" line.
-8 MALE TO 3/8" EFI TUBE ADAPT
Speedflow EFI Fuel Rail/Line Adapter
To suit Fuel lines, Fuel Rails & Fuel Filters with 3/8" OD pipe and have the Quick Connect flare.
-8AN Male Flare easily adapts to Braided Hose Ends.
Make upgrading your OEM fuel lines easy with this simple Screw On Quick Connect Adapter.
Will suit most late model Holden, Ford & Import Fuel Systems with 3/8" line.
-8 MALE TO 3/8" EFI TUBE ADAPT
Speedflow EFI Fuel Rail/Line Adapter
To suit Fuel lines, Fuel Rails & Fuel Filters with 3/8" OD pipe and have the Quick Connect flare.
-8AN Male Flare easily adapts to Braided Hose Ends.
Make upgrading your OEM fuel lines easy with this simple Screw On Quick Connect Adapter.
Will suit most late model Holden, Ford & Import Fuel Systems with 3/8" line.
-8 MALE TO 1/2" EFI TUBE ADAPT
Speedflow EFI Fuel Rail/Line Adapter -
To suit Fuel lines, Fuel Rails & Fuel Filters with 1/2" OD pipe and have the Quick Connect flare.
-8AN Male Flare easily adapts to Braided Hose Ends.
Make upgrading your OEM fuel lines easy with this simple Screw On Quick Connect Adapter.
Will suit most late model Holden, Ford & Import Fuel Systems with 1/2" line.
-8 MALE TO 1/2" EFI TUBE ADAPT
Speedflow EFI Fuel Rail/Line Adapter -
To suit Fuel lines, Fuel Rails & Fuel Filters with 1/2" OD pipe and have the Quick Connect flare.
-8AN Male Flare easily adapts to Braided Hose Ends.
Make upgrading your OEM fuel lines easy with this simple Screw On Quick Connect Adapter.
Will suit most late model Holden, Ford & Import Fuel Systems with 1/2" line.
-6 MALE TO 5/16" EFI MALE TUBE
Speedflow has made these fittings to be used any Order the factory fuel rails & hard line with the factory quick disconnect clips to adapt to a -6 AN male.
Hole Size 5/16''
Made in Australian the most technically advanced hole ends in the world.
Speedflow’s fittings are Made from 6061 aluminium with a one piece forged tube in angled fittings maximises strength flow.
Fully reusable.
Aircraft style cutter design locks the hose into the fittings leak free usage.
Double Swivel - Rotate after assembly.
Available in Blue or Black
Strongest most Compact Hose Ends Available.
High Flow Best Quality.
-6 MALE TO 5/16" EFI MALE TUBE
Speedflow has made these fittings to be used any Order the factory fuel rails & hard line with the factory quick disconnect clips to adapt to a -6 AN male.
Hole Size 5/16''
Made in Australian the most technically advanced hole ends in the world.
Speedflow’s fittings are Made from 6061 aluminium with a one piece forged tube in angled fittings maximises strength flow.
Fully reusable.
Aircraft style cutter design locks the hose into the fittings leak free usage.
Double Swivel - Rotate after assembly.
Available in Blue or Black
Strongest most Compact Hose Ends Available.
High Flow Best Quality.
-6 MALE TO 3/8" EFI MALE TUBE
Speedflow has made these fittings to be used any Order the factory fuel rails & hard line with the factory quick disconnect clips to adapt to a -6 AN male.
Hole Size 3/8''
Made in Australian the most technically advanced hole ends in the world.
Speedflow’s fittings are Made from 6061 aluminium with a one piece forged tube in angled fittings maximises strength flow.
Fully reusable.
Aircraft style cutter design locks the hose into the fittings leak free usage.
Double Swivel - Rotate after assembly.
Available in Blue or Black
Strongest most Compact Hose Ends Available.
High Flow Best Quality.
-6 MALE TO 3/8" EFI MALE TUBE
Speedflow has made these fittings to be used any Order the factory fuel rails & hard line with the factory quick disconnect clips to adapt to a -6 AN male.
Hole Size 3/8''
Made in Australian the most technically advanced hole ends in the world.
Speedflow’s fittings are Made from 6061 aluminium with a one piece forged tube in angled fittings maximises strength flow.
Fully reusable.
Aircraft style cutter design locks the hose into the fittings leak free usage.
Double Swivel - Rotate after assembly.
Available in Blue or Black
Strongest most Compact Hose Ends Available.
High Flow Best Quality.
-8 MALE TO 3/8" EFI MALE TUBE
Speedflow has made these fittings to be used any Order the factory fuel rails & hard line with the factory quick disconnect clips to adapt to a -8 AN male.
Hole Size 3/8''
Made in Australian the most technically advanced hole ends in the world.
Speedflow’s fittings are Made from 6061 aluminium with a one piece forged tube in angled fittings maximises strength flow.
Fully reusable.
Aircraft style cutter design locks the hose into the fittings leak free usage.
Double Swivel - Rotate after assembly.
Available in Blue or Black
Strongest most Compact Hose Ends Available.
High Flow Best Quality.
-8 MALE TO 3/8" EFI MALE TUBE
Speedflow has made these fittings to be used any Order the factory fuel rails & hard line with the factory quick disconnect clips to adapt to a -8 AN male.
Hole Size 3/8''
Made in Australian the most technically advanced hole ends in the world.
Speedflow’s fittings are Made from 6061 aluminium with a one piece forged tube in angled fittings maximises strength flow.
Fully reusable.
Aircraft style cutter design locks the hose into the fittings leak free usage.
Double Swivel - Rotate after assembly.
Available in Blue or Black
Strongest most Compact Hose Ends Available.
High Flow Best Quality.
-4 MALE TO 14.5mm BANJO ALLOY
Speedflow -4AN Male Flare to 720 Series M14 Banjo Eye Adapter.
Manufactured from marine quality 6061-T6 billet aluminium for superior corrosion and fatigue resistance.
Made from a billet material and fully machined in a single process in a CNC machine.
Red hard anodised aluminium construction (Also available in Black anodised finish).
Specially Designed for turbo oil feed lines which allows easy installation of aftermarket braided lines.
Banjo Bolts Sold Separately in the following Thread Sizes M12x1.25, M12x1.5, M14x1.5, 9/16"-18, 9/16"-24, 1/2"-20, 1/4" BSPP. These bolts are machined to work with Speedflow 720 series Adapters.
-4 MALE TO 14.5mm BANJO ALLOY
Speedflow -4AN Male Flare to 720 Series M14 Banjo Eye Adapter.
Manufactured from marine quality 6061-T6 billet aluminium for superior corrosion and fatigue resistance.
Made from a billet material and fully machined in a single process in a CNC machine.
Black anodised finish.
Specially Designed for turbo oil feed lines which allows easy installation of aftermarket braided lines.
Banjo Bolts Sold Separately in the following Thread Sizes M12x1.25, M12x1.5, M14x1.5, 9/16"-18, 9/16"-24, 1/2"-20, 1/4" BSPP. These bolts are machined to work with Speedflow 720 series Adapters.
-4 MALE TO 14.5mm BANJO STEEL
Speedflow -4AN Male Flare to 720 Series M14 Banjo Eye Adapter.
Manufactured from CS 1030 Steel and plated using Electroless Nickel process, which gives a uniform coating that provides a high degree of corrosion resistance and a bright finish that's appealing to the eye!.
Made from a billet material and fully machined in a single process in a CNC machine.
Specially Designed for turbo oil feed lines which allows easy installation of aftermarket braided lines.
Banjo Bolts Sold Separately in the following Thread Sizes M12x1.25, M12x1.5, M14x1.5, 9/16"-18, 9/16"-24, 1/2"-20, 1/4" BSPP. These bolts are machined to work with Speedflow 720 series Adapters.
-6 MALE TO 14.5mm BANJO ALLOY
Speedflow -6AN Male Flare to 720 Series M14 Banjo Eye Adapter.
Manufactured from marine quality 6061-T6 billet aluminium for superior corrosion and fatigue resistance.
Made from a billet material and fully machined in a single process in a CNC machine.
Red hard anodised aluminium construction (Also available in Black anodised finish).
Specially Designed for Fuel, Oil & Water lines which allows easy installation of aftermarket braided lines.
-6 MALE TO 14.5mm BANJO ALLOY
Speedflow -6AN Male Flare to 720 Series M14 Banjo Eye Adapter.
Manufactured from marine quality 6061-T6 billet aluminium for superior corrosion and fatigue resistance.
Made from a billet material and fully machined in a single process in a CNC machine.
Black hard anodised aluminium construction (Also available in Red anodised finish).
Specially Designed for Fuel, Oil & Water lines which allows easy installation of aftermarket braided lines.
-6 MALE TO 14.5mm DOUBLE BANJO
Speedflow -6AN Dual Male Flare to 720 Series M14 Banjo Eye Adapter.
Manufactured from marine quality 6061-T6 billet aluminium for superior corrosion and fatigue resistance.
Made from a billet material and fully machined in a single process in a CNC machine.
Red hard anodised aluminium construction (Also available in Black anodised finish).
-6 MALE TO 14.5mm DOUBLE BANJO
Speedflow -6AN Dual Male Flare to 720 Series M14 Banjo Eye Adapter.
Manufactured from marine quality 6061-T6 billet aluminium for superior corrosion and fatigue resistance.
Made from a billet material and fully machined in a single process in a CNC machine.
Black hard anodised aluminium construction (Also available in Red anodised finish).
BANJO BOLT 9/16"-24
Speedflow 720 Series 9/16"-24 Imperial Thread Banjo Bolt to suit 720 Banjo Eye Adapters.
Manufactured from marine quality 6061-T6 billet aluminium for superior corrosion and fatigue resistance.
Made from a billet material and fully machined in a single process in a CNC machine.
Blue hard anodised aluminium construction (Also available in Black anodised finish).
Specially designed and machined to suit Speedflow 720 Banjo Eye Adapters for use with Oil & Water lines which allows easy installation of aftermarket braided lines.
BANJO BOLT 9/16"-24
Speedflow 720 Series 9/16"-24 Imperial Thread Banjo Bolt to suit 720 Banjo Eye Adapters.
Manufactured from marine quality 6061-T6 billet aluminium for superior corrosion and fatigue resistance.
Made from a billet material and fully machined in a single process in a CNC machine.
Black hard anodised aluminium construction (Also available in Blue anodised finish).
Specially designed and machined to suit Speedflow 720 Banjo Eye Adapters for use with Oil & Water lines which allows easy installation of aftermarket braided lines.
BANJO BOLT M12 x 1.25
Speedflow 720 Series M12 x 1.25 Metric Thread Banjo Bolt to suit 720 Banjo Eye Adapters.
Manufactured from marine quality 6061-T6 billet aluminium for superior corrosion and fatigue resistance.
Made from a billet material and fully machined in a single process in a CNC machine.
Black hard anodised aluminium construction.
Specially designed and machined to suit Speedflow 720 Banjo Eye Adapters for use with Oil & Water lines which allows easy installation of aftermarket braided lines.
BANJO BOLT M12 X 1.5
Speedflow 720 Series M12 x 1.5 Metric Thread Banjo Bolt to suit 720 Banjo Eye Adapters.
Manufactured from marine quality 6061-T6 billet aluminium for superior corrosion and fatigue resistance.
Made from a billet material and fully machined in a single process in a CNC machine.
Black hard anodised aluminium construction.
Specially designed and machined to suit Speedflow 720 Banjo Eye Adapters for use with Oil & Water lines which allows easy installation of aftermarket braided lines
BANJO BOLT M14 X 1.5
Speedflow 720 Series M14 x 1.5 Metric Thread Banjo Bolt to suit 720 Banjo Eye Adapters.
Manufactured from marine quality 6061-T6 billet aluminium for superior corrosion and fatigue resistance.
Made from a billet material and fully machined in a single process in a CNC machine.
Black hard anodised aluminium construction.
Specially designed and machined to suit Speedflow 720 Banjo Eye Adapters for use with Oil & Water lines which allows easy installation of aftermarket braided lines.
BANJO BOLT 1/4" BSPP
Speedflow 720 Series 1/4" BSPP Thread Banjo Bolt to suit 720 Banjo Eye Adapters.
Manufactured from marine quality 6061-T6 billet aluminium for superior corrosion and fatigue resistance.
Made from a billet material and fully machined in a single process in a CNC machine.
Blue hard anodised aluminium construction (Also available in Black anodised finish).
Specially designed and machined to suit Speedflow 720 Banjo Eye Adapters for use with Oil & Water lines which allows easy installation of aftermarket braided lines.
BANJO BOLT 1/4" BSPP
Speedflow 720 Series 1/4" BSPP Thread Banjo Bolt to suit 720 Banjo Eye Adapters.
Manufactured from marine quality 6061-T6 billet aluminium for superior corrosion and fatigue resistance.
Made from a billet material and fully machined in a single process in a CNC machine.
Black hard anodised aluminium construction (Also available in Blue anodised finish).
Specially designed and machined to suit Speedflow 720 Banjo Eye Adapters for use with Oil & Water lines which allows easy installation of aftermarket braided lines.
BANJO BOLT 1/2"-20
Speedflow 720 Series 1/2"-20 Imperial Thread Banjo Bolt to suit 720 Banjo Eye Adapters.
Manufactured from marine quality 6061-T6 billet aluminium for superior corrosion and fatigue resistance.
Made from a billet material and fully machined in a single process in a CNC machine.
Blue hard anodised aluminium construction (Also available in Black anodised finish).
Specially designed and machined to suit Speedflow 720 Banjo Eye Adapters for use with Oil & Water lines which allows easy installation of aftermarket braided lines.
BANJO BOLT 1/2"-20
Speedflow 720 Series 1/2"-20 Imperial Thread Banjo Bolt to suit 720 Banjo Eye Adapters.
Manufactured from marine quality 6061-T6 billet aluminium for superior corrosion and fatigue resistance.
Made from a billet material and fully machined in a single process in a CNC machine.
Black hard anodised aluminium construction (Also available in Blue anodised finish).
Specially designed and machined to suit Speedflow 720 Banjo Eye Adapters for use with Oil & Water lines which allows easy installation of aftermarket braided lines.
BANJO BOLT 9/16"-18
Speedflow 720 Series 9/16"-18 Imperial Thread Banjo Bolt to suit 720 Banjo Eye Adapters.
Manufactured from marine quality 6061-T6 billet aluminium for superior corrosion and fatigue resistance.
Made from a billet material and fully machined in a single process in a CNC machine.
Blue hard anodised aluminium construction (Also available in Black anodised finish).
Specially designed and machined to suit Speedflow 720 Banjo Eye Adapters for use with Oil & Water lines which allows easy installation of aftermarket braided lines.
BANJO BOLT 9/16"-18
Speedflow 720 Series 9/16"-18 Imperial Thread Banjo Bolt to suit 720 Banjo Eye Adapters.
Manufactured from marine quality 6061-T6 billet aluminium for superior corrosion and fatigue resistance.
Made from a billet material and fully machined in a single process in a CNC machine.
Black hard anodised aluminium construction (Also available in Blue anodised finish).
Specially designed and machined to suit Speedflow 720 Banjo Eye Adapters for use with Oil & Water lines which allows easy installation of aftermarket braided lines.
M10 x 1.0 TO -6 MALE
Speedflow -6AN Male Flare to Metric M10 x 1.0 Thread Adapter Fittings.
Manufactured from marine quality 6061-T6 billet aluminium for superior corrosion and fatigue resistance.
Made from a billet rod and fully machined in a single process in a CNC machine.
Black hard anodised aluminium construction.
M10 x 1.0 TO -8 MALE
Made in Australia
Speedflow manufactures an extensive range of metric washer seal adapters to suit most metric threaded parts
Available to suit fuel pumps, filters, turbos, fuel rails, regulators much more
Size : -6
Thread Size : M10 x 1.50
Black hard coat anodising
Speedflow’s fittings are made from marine quality 6061 billet Aluminium
M12 x 1.25 TO -4 MALE
Speedflow -4AN Male Flare to Metric M12 x 1.25 Thread Adapter Fittings.
Manufactured from marine quality 6061-T6 billet aluminium for superior corrosion and fatigue resistance.
Made from a billet rod and fully machined in a single process in a CNC machine.
Black hard anodised aluminium construction.
M12 x 1.0 TO -6 MALE
Speedflow -6AN Male Flare to Metric M12 x 1.0 Thread Adapter Fittings.
Manufactured from marine quality 6061-T6 billet aluminium for superior corrosion and fatigue resistance.
Made from a billet rod and fully machined in a single process in a CNC machine.
Black hard anodised aluminium construction.
M12 x 1.25 TO -6 MALE
Speedflow -6AN Male Flare to Metric M12 x 1.25 Thread Adapter Fittings.
Manufactured from marine quality 6061-T6 billet aluminium for superior corrosion and fatigue resistance.
Made from a billet rod and fully machined in a single process in a CNC machine.
Black hard anodised aluminium construction.
M12 x 1.5 TO -6 MALE
Speedflow -6AN Male Flare to Metric M12 x 1.5 Thread Adapter Fittings.
Manufactured from marine quality 6061-T6 billet aluminium for superior corrosion and fatigue resistance.
Made from a billet rod and fully machined in a single process in a CNC machine.
Black hard anodised aluminium construction
M12 x 1.5 TO -8 MALE
Speedflow -8AN Male Flare to Metric M12 x 1.5 Thread Adapter Fittings.
Manufactured from marine quality 6061-T6 billet aluminium for superior corrosion and fatigue resistance.
Made from a billet rod and fully machined in a single process in a CNC machine.
Black hard anodised aluminium construction.
M14 x 1.5 TO -4 MALE
Speedflow -4AN Male Flare to Metric M14 x 1.5 Thread Adapter Fittings.
Manufactured from marine quality 6061-T6 billet aluminium for superior corrosion and fatigue resistance.
Made from a billet rod and fully machined in a single process in a CNC machine.
Black hard anodised aluminium construction.
M14 x 1.5 TO -6 MALE
Speedflow -6AN Male Flare to Metric M14 x 1.5 Thread Adapter Fittings.
Manufactured from marine quality 6061-T6 billet aluminium for superior corrosion and fatigue resistance.
Made from a billet rod and fully machined in a single process in a CNC machine.
Black hard anodised aluminium construction.
M14 x 1.5 TO -8 MALE
Speedflow -8AN Male Flare to Metric M14 x 1.5 Thread Adapter Fittings.
Manufactured from marine quality 6061-T6 billet aluminium for superior corrosion and fatigue resistance.
Made from a billet rod and fully machined in a single process in a CNC machine.
Black hard anodised aluminium construction.
M16 x 1.5 TO -6 MALE
Speedflow -6AN Male Flare to Metric M16 x 1.5 Thread Adapter Fittings.
Manufactured from marine quality 6061-T6 billet aluminium for superior corrosion and fatigue resistance.
Made from a billet rod and fully machined in a single process in a CNC machine.
Black hard anodised aluminium construction.
M16 x 1.5 TO -8 MALE
Speedflow -8AN Male Flare to Metric M16 x 1.5 Thread Adapter Fittings.
Manufactured from marine quality 6061-T6 billet aluminium for superior corrosion and fatigue resistance.
Made from a billet rod and fully machined in a single process in a CNC machine.
Black hard anodised aluminium construction.
M16 x 1.5 TO -10 MALE
Speedflow -10AN Male Flare to Metric M16 x 1.5 Thread Adapter Fittings.
Manufactured from marine quality 6061-T6 billet aluminium for superior corrosion and fatigue resistance.
Made from a billet rod and fully machined in a single process in a CNC machine.
Black hard anodised aluminium construction.
M16 x 1.5 TO -12 MALE
Speedflow -12AN Male Flare to Metric M16 x 1.5 Thread Adapter Fittings.
Manufactured from marine quality 6061-T6 billet aluminium for superior corrosion and fatigue resistance.
Made from a billet rod and fully machined in a single process in a CNC machine.
Black hard anodised aluminium construction.
M18 x 1.5 TO -6 MALE
Speedflow -6AN Male Flare to Metric M18 x 1.5 Thread Adapter Fittings.
Manufactured from marine quality 6061-T6 billet aluminium for superior corrosion and fatigue resistance.
Made from a billet rod and fully machined in a single process in a CNC machine.
Black hard anodised aluminium construction.
M18 x 1.5 TO -8 MALE
Speedflow -8AN Male Flare to Metric M18 x 1.5 Thread Adapter Fittings.
Manufactured from marine quality 6061-T6 billet aluminium for superior corrosion and fatigue resistance.
Made from a billet rod and fully machined in a single process in a CNC machine.
Black hard anodised aluminium construction.
M18 x 1.5 TO -10 MALE
Speedflow -10AN Male Flare to Metric M18 x 1.5 Thread Adapter Fittings.
Manufactured from marine quality 6061-T6 billet aluminium for superior corrosion and fatigue resistance.
Made from a billet rod and fully machined in a single process in a CNC machine.
Black hard anodised aluminium construction.
M18 x 1.5 TO -12 MALE
Speedflow -12AN Male Flare to Metric M18 x 1.5 Thread Adapter Fittings.
Manufactured from marine quality 6061-T6 billet aluminium for superior corrosion and fatigue resistance.
Made from a billet rod and fully machined in a single process in a CNC machine.
Black hard anodised aluminium construction.
M20 x 1.5 TO -6 MALE
Speedflow -6AN Male Flare to Metric M20 x 1.5 Thread Adapter Fittings.
Manufactured from marine quality 6061-T6 billet aluminium for superior corrosion and fatigue resistance.
Made from a billet rod and fully machined in a single process in a CNC machine.
Black hard anodised aluminium construction.
M20 x 1.5 TO -8 MALE
Speedflow -8AN Male Flare to Metric M20 x 1.5 Thread Adapter Fittings.
Manufactured from marine quality 6061-T6 billet aluminium for superior corrosion and fatigue resistance.
Made from a billet rod and fully machined in a single process in a CNC machine.
Black hard anodised aluminium construction.
M20 x 1.5 TO -10 MALE
Speedflow -10AN Male Flare to Metric M20 x 1.5 Thread Adapter Fittings.
Manufactured from marine quality 6061-T6 billet aluminium for superior corrosion and fatigue resistance.
Made from a billet rod and fully machined in a single process in a CNC machine.
Black hard anodised aluminium construction.
M20 x 1.5 TO -12 MALE
Speedflow -12AN Male Flare to Metric M20 x 1.5 Thread Adapter Fittings.
Manufactured from marine quality 6061-T6 billet aluminium for superior corrosion and fatigue resistance.
Made from a billet rod and fully machined in a single process in a CNC machine.
Black hard anodised aluminium construction.
M22 x 1.5 TO -6 MALE
Speedflow -6AN Male Flare to Metric M22 x 1.5 Thread Adapter Fittings.
Manufactured from marine quality 6061-T6 billet aluminium for superior corrosion and fatigue resistance.
Made from a billet rod and fully machined in a single process in a CNC machine.
Black hard anodised aluminium construction.
M22 x 1.5 TO -8 MALE
Speedflow -8AN Male Flare to Metric M22 x 1.5 Thread Adapter Fittings.
Manufactured from marine quality 6061-T6 billet aluminium for superior corrosion and fatigue resistance.
Made from a billet rod and fully machined in a single process in a CNC machine.
Black hard anodised aluminium construction.
M22 x 1.5 TO -10 MALE
Speedflow -10AN Male Flare to Metric M22 x 1.5 Thread Adapter Fittings.
Manufactured from marine quality 6061-T6 billet aluminium for superior corrosion and fatigue resistance.
Made from a billet rod and fully machined in a single process in a CNC machine.
Black hard anodised aluminium construction.
M22 x 1.5 TO -12 MALE
Speedflow -12AN Male Flare to Metric M22 x 1.5 Thread Adapter Fittings.
Manufactured from marine quality 6061-T6 billet aluminium for superior corrosion and fatigue resistance.
Made from a billet rod and fully machined in a single process in a CNC machine.
Black hard anodised aluminium construction.
M24 x 1.5 TO -6 MALE
Speedflow -6AN Male Flare to Metric M24 x 1.5 Thread Adapter Fittings.
Manufactured from marine quality 6061-T6 billet aluminium for superior corrosion and fatigue resistance.
Made from a billet rod and fully machined in a single process in a CNC machine.
Black hard anodised aluminium construction.
M14 x 1.5 BUMP TUBE TO -6 MALE
Speedflow -6AN Male Flare to Metric M14 x 1.5 Bump Tube Adapter Fitting.
Manufactured from marine quality 6061-T6 billet aluminium for superior corrosion and fatigue resistance.
Made from a billet rod and fully machined in a single process in a CNC machine.
Black hard anodised aluminium construction.
Great for Adapting Power Steering Racks & Pumps to Braided Lines.
Metric Thread seals with a O-ring (Supplied)
M16 x 1.5 BUMP TUBE TO -6 MALE
Speedflow -6AN Male Flare to Metric M16 x 1.5 Bump Tube Adapter Fitting.
Manufactured from marine quality 6061-T6 billet aluminium for superior corrosion and fatigue resistance.
Made from a billet rod and fully machined in a single process in a CNC machine.
Black hard anodised aluminium construction.
Great for Adapting Power Steering Racks & Pumps to Braided Lines.
Metric Thread seals with a O-ring (Supplied).
M18 x 1.5 BUMP TUBE TO -6 MALE
Speedflow -6AN Male Flare to Metric M18 x 1.5 Bump Tube Adapter Fitting.
Manufactured from marine quality 6061-T6 billet aluminium for superior corrosion and fatigue resistance.
Made from a billet rod and fully machined in a single process in a CNC machine.
Black hard anodised aluminium construction.
Great for Adapting Power Steering Racks & Pumps to Braided Lines.
Metric Thread seals with a O-ring (Supplied).
-6 MALE TO 1/4" BSPP ADAPTER
Made in Australia since 1983
British Standard Pipe Parallel (BSPP) is commonly found in older English vehicles in Engine Blocks, Oil Pumps, Fuel Filters and Oil Filter Adapters.
Speedflow -6 AN 1/4”BSPP Male BSP Parallel Adapter fitting
Red or black hard coat anodising
Speedflow’s fittings are made from marine quality 6061 billet Aluminium superior corrosion fatigue resistance most technically advanced in the world
-6 MALE TO 1/4" BSPP ADAPTER
Made in Australia since 1983
British Standard Pipe Parallel (BSPP) is commonly found in older English vehicles in Engine Blocks, Oil Pumps, Fuel Filters and Oil Filter Adapters.
Speedflow -6 AN 1/4”BSPP Male BSP Parallel Adapter fitting
black hard coat anodising
Speedflow’s fittings are made from marine quality 6061 billet Aluminium superior corrosion fatigue resistance most technically advanced in the world
-8 MALE TO 1/4" BSPP ADAPTER
Made in Australia since 1983
British Standard Pipe Parallel (BSPP) is commonly found in older English vehicles in Engine Blocks, Oil Pumps, Fuel Filters and Oil Filter Adapters.
Speedflow -8 AN 1/4”BSPP Male BSP Parallel Adapter fitting
Red or black hard coat anodising
Speedflow’s fittings are made from marine quality 6061 billet Aluminium superior corrosion fatigue resistance most technically advanced in the world
-8 MALE TO 1/4" BSPP ADAPTER
Made in Australia since 1983
British Standard Pipe Parallel (BSPP) is commonly found in older English vehicles in Engine Blocks, Oil Pumps, Fuel Filters and Oil Filter Adapters.
Speedflow -8 AN 1/4”BSPP Male BSP Parallel Adapter fitting
Red or black hard coat anodising
Speedflow’s fittings are made from marine quality 6061 billet Aluminium superior corrosion fatigue resistance most technically advanced in the world
-6 MALE TO 3/8" BSPP ADAPTER
Made in Australia since 1983
British Standard Pipe Parallel (BSPP) is commonly found in older English vehicles in Engine Blocks, Oil Pumps, Fuel Filters and Oil Filter Adapters.
Speedflow -6 AN 3/8”BSPP Male BSP Parallel Adapter fitting
Red or black hard coat anodising
Speedflow’s fittings are made from marine quality 6061 billet Aluminium superior corrosion fatigue resistance most technically advanced in the world
-6 MALE TO 3/8" BSPP ADAPTER
Made in Australia since 1983
British Standard Pipe Parallel (BSPP) is commonly found in older English vehicles in Engine Blocks, Oil Pumps, Fuel Filters and Oil Filter Adapters.
Speedflow -6 AN 3/8”BSPP Male BSP Parallel Adapter fitting
Black hard coat anodising
Speedflow’s fittings are made from marine quality 6061 billet Aluminium superior corrosion fatigue resistance most technically advanced in the world
-8 MALE TO 3/8" BSPP ADAPTER
Made in Australia since 1983
British Standard Pipe Parallel (BSPP) is commonly found in older English vehicles in Engine Blocks, Oil Pumps, Fuel Filters and Oil Filter Adapters.
Speedflow -8 AN 3/8”BSPP Male BSP Parallel Adapter fitting
Red or black hard coat anodising
Speedflow’s fittings are made from marine quality 6061 billet Aluminium superior corrosion fatigue resistance most technically advanced in the world