Holden FJ FE FC FB EK EJ EH HD HR HK HT HG
Drag Race Adjustable
Rear Shock Absorber
(These are not suitable for very low vehicles and may require lower mounting to be modified to allow fitment)
Please note these are not a replacement part specifically designed for this particular application. Please refer to the measurements listed below to ensure correct fitment.
Competition Engineering Extended length - 495mm (original length 482mm)
Competition Engineering Compressed length - 314mm (original length 297mm)
Upper Mount - Stud
Lower Mount - Ferrule
Includes Rubber Bushes, Washers & Nuts For Both Shockers
These Competition Engineering adjustable drag shocks offer a 3-way valving system to dial-in the extension/compression ratio needed for any track condition. The front shocks have three adjustable ratios of 90/10, 80/20, and 60/40. The ratios for the rear shocks are 70/30, 60/40, and 50/50. These numbers represent the percentage of force required to extend (first number) and compress (second number) the shock. By changing the settings on the front and rear shocks, you can dial-in the car to raise the front on initial launch for weight transfer, and then settle smoothly for a final charge to the finish line.
Genuine Competition Engineering - Made In USA - C2705
- TitleDRAG SHOCK HOLD FJ-HT (EACH)
- BrandCompetition Engineering
- Weigh2.000 kg