Engines & Components
VACUUM PUMP REGULATOR VALVE -12
Vacuum Pump Regulator
With Adjustable Knob
FEATURES:
Regulator screws directly into vacuum pump's -12AN inlet — no need to drill additional holes in the valve cover
360 Degree directional adjustability by turning the built-in adjustment knob to get the precise amount of vacuum desired
Tightening the integral locknut keeps the adjustment locked until the next adjustment is needed
Can be disassembled for easy cleaning and maintenance and will work with any vacuum level
Made from 6061 billet aluminium with a clear anodized finish
Prevents pulling excess oil out of the crankcase
HOLD V8 ALL BOLT ON ADJUSTABLE
S/T Roller Rocker (Set) 1.65 Ratio (5/16" Mount, Shaft Bolt-On Adjustable)
Suit Holden 253-308
Street Terra Features:
Economically priced rocker set for popular applications with strong vacuum die cast arm designed for high performance street and budget race applications with stock or mild camshafts and mildly stronger valve springs.
Ultra reliable standard replacement for pressed metal rockers on stock engines.
Best quality hardware including oversize ground trunnions and needle roller bearings for durability and low friction.
No comparable product has these critical features.
Available in Unique "EASY FIT" and traditional stud type designs.
Billet Oil Filter Remote MountKit Single Filter Kit -10 hoseAF64-2042
Single Billet Oil Filter Remote Mount Kit
Aeroflow has become synonymous with premium quality performance products. Aeroflow's objective has been to incorporate state-of-the-art manufacturing, aerospace quality materials and rigid quality controls to produce quality performance products at extraordinary value. Aeroflow has taken its forward thinking knowledge to the street, manufacturing a wide range of race quality products to improve street performance and dependability.
BILLET DUAL FILTER MOUNT BLACK SUITS 2 X 3/4"-16
Dual Billet Remote Filter Head - Side Entry
3/4" -16 Filter Thread with 2 x -8 Port Plugs Included
Machined from 6061-T6 billet aluminium and utilises side entry -8ORB inlet and outlet ports. Provides superior engine protection. Perfect combination when used with Aeroflow's Billet Oil filters
ls Chev fabricated oil pan raer sump hq-wb style pan
Fabricated Oil Pan
Rear Pan Suit Holden HQ-WB With GM LS Series (5.5L Capacity)
Aeroflow has become synonymous with premium quality performance products. Aeroflow's objective has been to incorporate state-of-the-art manufacturing, aerospace quality materials and rigid quality controls to produce quality performance products at extraordinary value. Aeroflow has taken its forward thinking knowledge to the street, manufacturing a wide range of race quality products to improve street performance and dependability.
HOLDEN LS2 VE BALANCER
Race Series Harmonic Balancer (Serpentine Belt) Suit Chev LS6 5.7L, LS2 6.0L, LS3 6.2L V8 (Neutral Balance)
HOLDEN VE LS2 25 PERCENT UNDER DRIVE
Race Series Harmonic Balancer (Serpentine Belt) 25% Under Drive Suit Chev LS6 5.7L, LS2 6.0L, LS3 6.2L V8 (Neutral Balance)
GEN 111 10 PERCENT UNDERDRIVE
Race Series Harmonic Balancer (Serpentine Belt) 10% Under Drive Suit Chev LS1 5.7L V8 (Neutral Balance)
TOOL STEEL RETAINER 1.55 OD
10 ° Lightweight Tool Steel Retainers 1.437" - 1.500" Valve Spring Diameter
CNC - machined for consistent quality
Developed using latest FEA and CAD software
Spintro tested to extreme rpm to prove strength is equivalent to titanium and stronger than chromemoly steel
LS1-2-3-6 BELT TENSIONER
Billet LS Belt Tensioner
Suit GM LS1 - LS7
The GM LS engines with the factory spring loaded belt tensioners become prone to throwing belts when used in performance applications and with after market balancers. These bolt-on Billet LS Belt Tensioners are a fully adjustable solution for controlling potentially damaging resonance and maintaining desired belt tension.
MOROSO OIL PUMP DRIVE KIT SBF 4 BOLT
Oil Pump & Vacuum Pump Drive Kit, Flange Style Suit Small Block Ford, Short Style
Mandrel Length Minus Flange: 3.500"
Required Balancer: 4-Bolt, 3.30" bolt circle, 2.382" male register, Length: 4.125"
Bolts to balancer-balancer does not need to be drilled like older designs
Pulleys are hard coat anodised and mandrel is black oxide for exceptional strength and extended service life
Kits include: one-piece, forged steel drive mandrel, 4" V-belt pulley for alternator, 2-1/2" V-belt pulley for vacuum pump, 1" (16 tooth) Gilmer pulley for external oil pump, guide plates, assorted spacers, belt guides and hardware
HOLDEN I-BEAM CONROD SET CHEVY
4340 Forged I-Beam Conrods Holden V8 253-308-304-355, 5.700" length
With 3/8" Thru-Bolts, SCAT's Lightweight I-Beam design offers more strength than stock replacement rods.
5.700" Rod Length.
2.124" Journal size.
.927" Pin dia.
.880" B.E. Width.
3/8" 12-point 8740 cap screw bolts
Special dowelled cap for perfect cap-to-rod alignment resulting in increased strength and longer life.
Bushed.
Balanced at Scat to 1 gram in steps.
Lightweight I-Beam design for increased power and quicker RPM.
All Scat Rods are precision honed on the latest Sunnen Equipment.
Designed to handle increased horsepower versus stock replacement rods.
SCAT connecting rods feature the same high-quality craftsmanship that has led us to the forefront of the performance industry. SCAT rods are made from a 2-piece chromoly steel forging to ensure maximum strength and durability. We offer a complete line of Small and Big-Block Chevy, Small and Big-Block Ford, Holden and many more in both the I-Beam and H-Beam designs. Precision finished at SCAT on the newest and most modern machinery available by SCAT's master machinists.
SCAT CHEVY SB 350-383 3.75 STROKE 5.700 ROD EXT BALANCE CAST CRANK
Series 9000 Cast Stroker Lightweight Crankshaft SB Chevy stroke to 383, 3.750" Stroke
A perfect way to increase cubic inches on mild to moderate street engines.
3.750" Stroke.
5.700" Rod length.
2.100" Big end journal
350 Mains.
External balance.
Weight: 51 lbs.
Aero-wing counterweights increase horsepower by reducing windage.
Straight shot oil holes.
Lightening holes in all rod throws.
Precision ground and micro polished.
Designed after our custom billets and made from SCAT's exclusive space-age 9000 material.
FORD 302C-460 BLT ON ADJ
S/T Roller Rocker Set 1.72 Ratio (5/16" Bolt on Adjustable)
Suit Ford 302-351C, 429-460
Street Terra Features:
Economically priced rocker set for popular applications with strong vacuum die cast arm designed for high performance street and budget race applications with stock or mild camshafts and mildly stronger valve springs.
Ultra reliable standard replacement for pressed metal rockers on stock engines.
Best quality hardware including oversize ground trunnions and needle roller bearings for durability and low friction.
No comparable product has these critical features.
Available in Unique "EASY FIT" and traditional stud type designs.
ENGINE MOUNT SUIT FORD FG XR6 TURBO AND V8
Description Designed as a bolt in replacement for the OEM Hydraulic engine mounts, Tuff Mounts will take your Big Horsepower & Big Torque! 100% Captive Unbreakable design Easy to replace Polyurethane Bushes specifically designed for ENGINE NVH Finished in Powdercoat for Quality & Durability Designed & Manufactured in South Australia, using only the best Quality Products.
ENGINE MOUNT MUSTANG 65-70 & COUGAR - WIND, CLEV, DART BLOCK
TUFF MOUNTS to suit MUSTANG 1964-1970, will also suit Ford Cougar and some Aussie early Falcons
with the following Small Block engines, CLEVELAND, WINDSOR and designed with specific clearance for the DART Blocks
Designed to suit Standard to BIG HP Engines
Comes with full complete Bolt Kit & instructions
Aussie Designed & Manufactured here in South Australia
Finished in Gloss Black Powdercoat for looks & Durabilty
SCAT HOLDEN 355 CAST CRANK 3.480" STROKE 5.627" ROD
A perfect way to increase cubic inches on mild to moderate street engines. 3.480" Stroke. 5.627" Rod length. 2.124" Big end journal - Holden size Can internal balance, may require heavy metal. Suit blocks with Rope Seals Aero-wing counterweights increase horsepower by reducing windage. Straight shot oil holes. Lightening holes in all rod throws.. Precision ground and micro polished. Designed after our custom billets and made from SCAT's exclusive space-age 9000 material.
COMETIC FORD BA-BF 6CYL 3.661" .075"
MLS (Multi-Layer Steel) Head Gaskets
Provide maximum sealing performance for today's high output engines and require no sealants. MLS gaskets are ideal for both aluminium heads to aluminium blocks and aluminium heads to cast iron blocks. They can withstand the shearing force created by the two materials. MLS gaskets have increased strength because they are comprised of multiple layers of stainless steel; which also creates the ability to rebound and resist corrosion. The outer layers are embossed and coated on both sides with Viton (a flouroelastomer rubber based material that is heat resistant to 250° C/ 482° F). Viton is designed to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes. The center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple rements.
WILSON BILLET 1.5'' PORTED SPACER SUIT 4500
Wilson Manifolds Tapered Spacers feature a computer generated variable radius taper design that maximizes the airflow through the carburetor and enhances air/fuel distribution for more horsepower. Part throttle performance and distribution are improved by redirecting the flow pattern created by the partially open throttle blades and gradually reducing the velocity of the air/fuel mixture entering the plenum to allow for a smoother transition into each runner; full throttle performance is improved by increased flow. Our Tapered spacers can increase flow through the carburetor/throttle body by as much as 110 CFM. Wilson Manifolds tapered spacers will increase torque, horsepower and acceleration throughout the entire RPM range. We offer the most complete line of 4-Hole Tapered spacers in 390, 4150, 4500, Q-Jet & 2bbl adapters to provide the high performance consumer with the ability to tune their engine for the maximum performance for any application. Wilson Manifolds is the only manufacturer to offer a choice of tapered spacer heights and produces the only fully CNC machined billet tapered spacer on the market. Wilson Manifolds Tapered spacers will benefit any vehicle that operates under both part and full throttle conditions such as bracket racing using a throttle stop, drag racing, circle track, road racing, off shore power boats, street/strip engines and towing vehicles. * Up To 30+ Bolt On Horsepower * Improves Throttle Response * Improves Distribution * Increases Signal To The Carburetor * Increases Flow Through The Carburetor / Throttle Body * Oval, Drag, Street, Marine & Towing * Works Through The Entire RPM Range * Light Weight Design * Over 30 Years Experience Making Tapered Spacers * Alcohol Compatible
AUTO DRAG 15X10 3-5/16BS 4.75PCD
Wilson Manifolds Tapered Spacers feature a computer generated variable radius taper design that maximizes the airflow through the carburetor and enhances air/fuel distribution for more horsepower. Part throttle performance and distribution are improved by redirecting the flow pattern created by the partially open throttle blades and gradually reducing the velocity of the air/fuel mixture entering the plenum to allow for a smoother transition into each runner; full throttle performance is improved by increased flow. Our Tapered spacers can increase flow through the carburetor/throttle body by as much as 110 CFM. Wilson Manifolds tapered spacers will increase torque, horsepower and acceleration throughout the entire RPM range. We offer the most complete line of 4-Hole Tapered spacers in 390, 4150, 4500, Q-Jet & 2bbl adapters to provide the high performance consumer with the ability to tune their engine for the maximum performance for any application. Wilson Manifolds is the only manufacturer to offer a choice of tapered spacer heights and produces the only fully CNC machined billet tapered spacer on the market. Wilson Manifolds Tapered spacers will benefit any vehicle that operates under both part and full throttle conditions such as bracket racing using a throttle stop, drag racing, circle track, road racing, off shore power boats, street/strip engines and towing vehicles. * Up To 30+ Bolt On Horsepower * Improves Throttle Response * Improves Distribution * Increases Signal To The Carburetor * Increases Flow Through The Carburetor / Throttle Body * Oval, Drag, Street, Marine & Towing * Works Through The Entire RPM Range * Light Weight Design * Over 30 Years Experience Making Tapered Spacers * Alcohol Compatible
AUTO DRAG 15 X 10 4-7/8 BS
Wilson Manifolds Tapered Spacers feature a computer generated variable radius taper design that maximizes the airflow through the carburetor and enhances air/fuel distribution for more horsepower. Part throttle performance and distribution are improved by redirecting the flow pattern created by the partially open throttle blades and gradually reducing the velocity of the air/fuel mixture entering the plenum to allow for a smoother transition into each runner; full throttle performance is improved by increased flow. Our Tapered spacers can increase flow through the carburetor/throttle body by as much as 110 CFM. Wilson Manifolds tapered spacers will increase torque, horsepower and acceleration throughout the entire RPM range. We offer the most complete line of 4-Hole Tapered spacers in 390, 4150, 4500, Q-Jet & 2bbl adapters to provide the high performance consumer with the ability to tune their engine for the maximum performance for any application. Wilson Manifolds is the only manufacturer to offer a choice of tapered spacer heights and produces the only fully CNC machined billet tapered spacer on the market. Wilson Manifolds Tapered spacers will benefit any vehicle that operates under both part and full throttle conditions such as bracket racing using a throttle stop, drag racing, circle track, road racing, off shore power boats, street/strip engines and towing vehicles. * Up To 30+ Bolt On Horsepower * Improves Throttle Response * Improves Distribution * Increases Signal To The Carburetor * Increases Flow Through The Carburetor / Throttle Body * Oval, Drag, Street, Marine & Towing * Works Through The Entire RPM Range * Light Weight Design * Over 30 Years Experience Making Tapered Spacers * Alcohol Compatible
AUTO-DRAG 15 X 8-1/2 3-5/16 BS 4.5 FORD
Wilson Manifolds Tapered Spacers feature a computer generated variable radius taper design that maximizes the airflow through the carburetor and enhances air/fuel distribution for more horsepower. Part throttle performance and distribution are improved by redirecting the flow pattern created by the partially open throttle blades and gradually reducing the velocity of the air/fuel mixture entering the plenum to allow for a smoother transition into each runner; full throttle performance is improved by increased flow. Our Tapered spacers can increase flow through the carburetor/throttle body by as much as 110 CFM. Wilson Manifolds tapered spacers will increase torque, horsepower and acceleration throughout the entire RPM range. We offer the most complete line of 4-Hole Tapered spacers in 390, 4150, 4500, Q-Jet & 2bbl adapters to provide the high performance consumer with the ability to tune their engine for the maximum performance for any application. Wilson Manifolds is the only manufacturer to offer a choice of tapered spacer heights and produces the only fully CNC machined billet tapered spacer on the market. Wilson Manifolds Tapered spacers will benefit any vehicle that operates under both part and full throttle conditions such as bracket racing using a throttle stop, drag racing, circle track, road racing, off shore power boats, street/strip engines and towing vehicles. * Up To 30+ Bolt On Horsepower * Improves Throttle Response * Improves Distribution * Increases Signal To The Carburetor * Increases Flow Through The Carburetor / Throttle Body * Oval, Drag, Street, Marine & Towing * Works Through The Entire RPM Range * Light Weight Design * Over 30 Years Experience Making Tapered Spacers * Alcohol Compatible
AUTO-DRAG 15 X 10 4-7/8 BS
Wilson Manifolds Tapered Spacers feature a computer generated variable radius taper design that maximizes the airflow through the carburetor and enhances air/fuel distribution for more horsepower. Part throttle performance and distribution are improved by redirecting the flow pattern created by the partially open throttle blades and gradually reducing the velocity of the air/fuel mixture entering the plenum to allow for a smoother transition into each runner; full throttle performance is improved by increased flow. Our Tapered spacers can increase flow through the carburetor/throttle body by as much as 110 CFM. Wilson Manifolds tapered spacers will increase torque, horsepower and acceleration throughout the entire RPM range. We offer the most complete line of 4-Hole Tapered spacers in 390, 4150, 4500, Q-Jet & 2bbl adapters to provide the high performance consumer with the ability to tune their engine for the maximum performance for any application. Wilson Manifolds is the only manufacturer to offer a choice of tapered spacer heights and produces the only fully CNC machined billet tapered spacer on the market. Wilson Manifolds Tapered spacers will benefit any vehicle that operates under both part and full throttle conditions such as bracket racing using a throttle stop, drag racing, circle track, road racing, off shore power boats, street/strip engines and towing vehicles. * Up To 30+ Bolt On Horsepower * Improves Throttle Response * Improves Distribution * Increases Signal To The Carburetor * Increases Flow Through The Carburetor / Throttle Body * Oval, Drag, Street, Marine & Towing * Works Through The Entire RPM Range * Light Weight Design * Over 30 Years Experience Making Tapered Spacers * Alcohol Compatible
AUTO-DRAG 15 X 3-1/2' 1-5/8'B/S
Wilson Manifolds Tapered Spacers feature a computer generated variable radius taper design that maximizes the airflow through the carburetor and enhances air/fuel distribution for more horsepower. Part throttle performance and distribution are improved by redirecting the flow pattern created by the partially open throttle blades and gradually reducing the velocity of the air/fuel mixture entering the plenum to allow for a smoother transition into each runner; full throttle performance is improved by increased flow. Our Tapered spacers can increase flow through the carburetor/throttle body by as much as 110 CFM. Wilson Manifolds tapered spacers will increase torque, horsepower and acceleration throughout the entire RPM range. We offer the most complete line of 4-Hole Tapered spacers in 390, 4150, 4500, Q-Jet & 2bbl adapters to provide the high performance consumer with the ability to tune their engine for the maximum performance for any application. Wilson Manifolds is the only manufacturer to offer a choice of tapered spacer heights and produces the only fully CNC machined billet tapered spacer on the market. Wilson Manifolds Tapered spacers will benefit any vehicle that operates under both part and full throttle conditions such as bracket racing using a throttle stop, drag racing, circle track, road racing, off shore power boats, street/strip engines and towing vehicles. * Up To 30+ Bolt On Horsepower * Improves Throttle Response * Improves Distribution * Increases Signal To The Carburetor * Increases Flow Through The Carburetor / Throttle Body * Oval, Drag, Street, Marine & Towing * Works Through The Entire RPM Range * Light Weight Design * Over 30 Years Experience Making Tapered Spacers * Alcohol Compatible
AUTO-DRAG 15 X 3-1/2' 1-5/8'B/S
Wilson Manifolds Tapered Spacers feature a computer generated variable radius taper design that maximizes the airflow through the carburetor and enhances air/fuel distribution for more horsepower. Part throttle performance and distribution are improved by redirecting the flow pattern created by the partially open throttle blades and gradually reducing the velocity of the air/fuel mixture entering the plenum to allow for a smoother transition into each runner; full throttle performance is improved by increased flow. Our Tapered spacers can increase flow through the carburetor/throttle body by as much as 110 CFM. Wilson Manifolds tapered spacers will increase torque, horsepower and acceleration throughout the entire RPM range. We offer the most complete line of 4-Hole Tapered spacers in 390, 4150, 4500, Q-Jet & 2bbl adapters to provide the high performance consumer with the ability to tune their engine for the maximum performance for any application. Wilson Manifolds is the only manufacturer to offer a choice of tapered spacer heights and produces the only fully CNC machined billet tapered spacer on the market. Wilson Manifolds Tapered spacers will benefit any vehicle that operates under both part and full throttle conditions such as bracket racing using a throttle stop, drag racing, circle track, road racing, off shore power boats, street/strip engines and towing vehicles. * Up To 30+ Bolt On Horsepower * Improves Throttle Response * Improves Distribution * Increases Signal To The Carburetor * Increases Flow Through The Carburetor / Throttle Body * Oval, Drag, Street, Marine & Towing * Works Through The Entire RPM Range * Light Weight Design * Over 30 Years Experience Making Tapered Spacers * Alcohol Compatible
AUTO-DRAG 15 X 7 3-5/16BS
Wilson Manifolds Tapered Spacers feature a computer generated variable radius taper design that maximizes the airflow through the carburetor and enhances air/fuel distribution for more horsepower. Part throttle performance and distribution are improved by redirecting the flow pattern created by the partially open throttle blades and gradually reducing the velocity of the air/fuel mixture entering the plenum to allow for a smoother transition into each runner; full throttle performance is improved by increased flow. Our Tapered spacers can increase flow through the carburetor/throttle body by as much as 110 CFM. Wilson Manifolds tapered spacers will increase torque, horsepower and acceleration throughout the entire RPM range. We offer the most complete line of 4-Hole Tapered spacers in 390, 4150, 4500, Q-Jet & 2bbl adapters to provide the high performance consumer with the ability to tune their engine for the maximum performance for any application. Wilson Manifolds is the only manufacturer to offer a choice of tapered spacer heights and produces the only fully CNC machined billet tapered spacer on the market. Wilson Manifolds Tapered spacers will benefit any vehicle that operates under both part and full throttle conditions such as bracket racing using a throttle stop, drag racing, circle track, road racing, off shore power boats, street/strip engines and towing vehicles. * Up To 30+ Bolt On Horsepower * Improves Throttle Response * Improves Distribution * Increases Signal To The Carburetor * Increases Flow Through The Carburetor / Throttle Body * Oval, Drag, Street, Marine & Towing * Works Through The Entire RPM Range * Light Weight Design * Over 30 Years Experience Making Tapered Spacers * Alcohol Compatible
AUTO-DRAG 15 X 7 3-5/16BS 4.75
Wilson Manifolds Tapered Spacers feature a computer generated variable radius taper design that maximizes the airflow through the carburetor and enhances air/fuel distribution for more horsepower. Part throttle performance and distribution are improved by redirecting the flow pattern created by the partially open throttle blades and gradually reducing the velocity of the air/fuel mixture entering the plenum to allow for a smoother transition into each runner; full throttle performance is improved by increased flow. Our Tapered spacers can increase flow through the carburetor/throttle body by as much as 110 CFM. Wilson Manifolds tapered spacers will increase torque, horsepower and acceleration throughout the entire RPM range. We offer the most complete line of 4-Hole Tapered spacers in 390, 4150, 4500, Q-Jet & 2bbl adapters to provide the high performance consumer with the ability to tune their engine for the maximum performance for any application. Wilson Manifolds is the only manufacturer to offer a choice of tapered spacer heights and produces the only fully CNC machined billet tapered spacer on the market. Wilson Manifolds Tapered spacers will benefit any vehicle that operates under both part and full throttle conditions such as bracket racing using a throttle stop, drag racing, circle track, road racing, off shore power boats, street/strip engines and towing vehicles. * Up To 30+ Bolt On Horsepower * Improves Throttle Response * Improves Distribution * Increases Signal To The Carburetor * Increases Flow Through The Carburetor / Throttle Body * Oval, Drag, Street, Marine & Towing * Works Through The Entire RPM Range * Light Weight Design * Over 30 Years Experience Making Tapered Spacers * Alcohol Compatible
AUTO-DRAG 15 X 8-1/2 3-5/16BS
Wilson Manifolds Tapered Spacers feature a computer generated variable radius taper design that maximizes the airflow through the carburetor and enhances air/fuel distribution for more horsepower. Part throttle performance and distribution are improved by redirecting the flow pattern created by the partially open throttle blades and gradually reducing the velocity of the air/fuel mixture entering the plenum to allow for a smoother transition into each runner; full throttle performance is improved by increased flow. Our Tapered spacers can increase flow through the carburetor/throttle body by as much as 110 CFM. Wilson Manifolds tapered spacers will increase torque, horsepower and acceleration throughout the entire RPM range. We offer the most complete line of 4-Hole Tapered spacers in 390, 4150, 4500, Q-Jet & 2bbl adapters to provide the high performance consumer with the ability to tune their engine for the maximum performance for any application. Wilson Manifolds is the only manufacturer to offer a choice of tapered spacer heights and produces the only fully CNC machined billet tapered spacer on the market. Wilson Manifolds Tapered spacers will benefit any vehicle that operates under both part and full throttle conditions such as bracket racing using a throttle stop, drag racing, circle track, road racing, off shore power boats, street/strip engines and towing vehicles. * Up To 30+ Bolt On Horsepower * Improves Throttle Response * Improves Distribution * Increases Signal To The Carburetor * Increases Flow Through The Carburetor / Throttle Body * Oval, Drag, Street, Marine & Towing * Works Through The Entire RPM Range * Light Weight Design * Over 30 Years Experience Making Tapered Spacers * Alcohol Compatible
AUTO-DRAG 15 X 8-1/2 4-7/8 BS
Wilson Manifolds Tapered Spacers feature a computer generated variable radius taper design that maximizes the airflow through the carburetor and enhances air/fuel distribution for more horsepower. Part throttle performance and distribution are improved by redirecting the flow pattern created by the partially open throttle blades and gradually reducing the velocity of the air/fuel mixture entering the plenum to allow for a smoother transition into each runner; full throttle performance is improved by increased flow. Our Tapered spacers can increase flow through the carburetor/throttle body by as much as 110 CFM. Wilson Manifolds tapered spacers will increase torque, horsepower and acceleration throughout the entire RPM range. We offer the most complete line of 4-Hole Tapered spacers in 390, 4150, 4500, Q-Jet & 2bbl adapters to provide the high performance consumer with the ability to tune their engine for the maximum performance for any application. Wilson Manifolds is the only manufacturer to offer a choice of tapered spacer heights and produces the only fully CNC machined billet tapered spacer on the market. Wilson Manifolds Tapered spacers will benefit any vehicle that operates under both part and full throttle conditions such as bracket racing using a throttle stop, drag racing, circle track, road racing, off shore power boats, street/strip engines and towing vehicles. * Up To 30+ Bolt On Horsepower * Improves Throttle Response * Improves Distribution * Increases Signal To The Carburetor * Increases Flow Through The Carburetor / Throttle Body * Oval, Drag, Street, Marine & Towing * Works Through The Entire RPM Range * Light Weight Design * Over 30 Years Experience Making Tapered Spacers * Alcohol Compatible
AUTO-DRAG 15 X 8-1/2 4-7/8 BS
Wilson Manifolds Tapered Spacers feature a computer generated variable radius taper design that maximizes the airflow through the carburetor and enhances air/fuel distribution for more horsepower. Part throttle performance and distribution are improved by redirecting the flow pattern created by the partially open throttle blades and gradually reducing the velocity of the air/fuel mixture entering the plenum to allow for a smoother transition into each runner; full throttle performance is improved by increased flow. Our Tapered spacers can increase flow through the carburetor/throttle body by as much as 110 CFM. Wilson Manifolds tapered spacers will increase torque, horsepower and acceleration throughout the entire RPM range. We offer the most complete line of 4-Hole Tapered spacers in 390, 4150, 4500, Q-Jet & 2bbl adapters to provide the high performance consumer with the ability to tune their engine for the maximum performance for any application. Wilson Manifolds is the only manufacturer to offer a choice of tapered spacer heights and produces the only fully CNC machined billet tapered spacer on the market. Wilson Manifolds Tapered spacers will benefit any vehicle that operates under both part and full throttle conditions such as bracket racing using a throttle stop, drag racing, circle track, road racing, off shore power boats, street/strip engines and towing vehicles. * Up To 30+ Bolt On Horsepower * Improves Throttle Response * Improves Distribution * Increases Signal To The Carburetor * Increases Flow Through The Carburetor / Throttle Body * Oval, Drag, Street, Marine & Towing * Works Through The Entire RPM Range * Light Weight Design * Over 30 Years Experience Making Tapered Spacers * Alcohol Compatible
HYPER-GATE 45 BLACK-14PSI
This is a Gen4 External Wastegate and has been superseded by the Award Winning Turbosmart GenV Range of Modular External Wastegates: Click here to see the Turbosmart GenV HyperGate45 Range of External Wastegates The Turbosmart Legacy Program ensures all previous generation products continue to be fully supported with Spares and Accessories. Actual product availability may continue well after official production ends so please call your dealer or distributor for more info. All Spares and Accessories can be found Here on our Website. The Turbosmart Gen4 Range of External Wastegates are designed with minimum size & flow in mind. Smaller and lighter than the previous model, the Gen4 HyperGate45 features Turbosmart’s unique locking collar design for reduced size and quicker spring changes. (Options from 3psi to 26psi available)
YELLA TERRA FORD CLEVELAND AND 460 1.73 7/16 ADJUSTABLE ROCKERS
1.73 RATIO - 7/16" STUD Ford V8 Cleveland & 429-460 Pro Street Roller Rockers Pro Street Designed for high revving street/strip applications. No other comparable product can compete with 600lbs* maximum open spring pressure whilst retaining factory size bolt-down hardware. Manufactured and assembled in Australia using the highest quality materials and componentry consistent with those found in our Platinum race series. Our wide range of true ratios allows you to achieve high lift without relying solely on your camshaft… a trend many engine builders and racers alike are adopting to relieve the inertia on lifters and pushrods generated by aggressive and often violent ramp rates required to make big lift. Ideal for harsh street and strip applications, these rockers have got what it takes to last!
HOLLEY TERMINATOR X 3.5'' HANDHELD CONTROLLER
This 3.5" Touch Screen LCD Handheld Controller gives you access to a wide range of tuning options. Additionally this display can be used as a fully customizable data monitor! With this 3.5" display your system vitals can be viewed with a quick glance! Full Color, Backlit 3.5” Touch Screen LCD Laptop-Free Tuning changes to help optimize mileage, driveability and performance Basic Tuning options allow simple adjustments of Basic Fuel, Fuel Learn, Basic Idle, Spark, and More! System Tuning options allow modifications to Outputs, Engine Setup, Ignition Setup Advanced Tuning options allow fine tuning of Fuel, Closed Loop, Learn, and Idle (including IAC parameters and Idle Spark) Monitor a vast number of Parameters in Pre-Configured Multi-Gauge and Monitor Screens, or customize your own Set up ECU Datalogging, Download Datalogs to SD Card, Upload and Download Global Folders via SD Card, Update ECU Firmware and Adjust Rev Limiters 1 and 2 Includes 3.5” Touch Screen, Mounting Sleeve, Power and Extension Harness, SD Card, and User Manual CD
FORD 289-351W 164 TOOTH 302-351C FLYWHEEL
Steel Flywheel
Ford V8 External Balance 11" Diameter
Yella Terra Steel Flywheels & Flexplate
Most OEM stock Flywheels/Flexplates are heavy cast iron parts designed for optimum road driveability. Although this may be important for everyday road cars, this driveability comes at the expense of engine response and acceleration and is not suited to performance or race vehicles. These cast iron Flywheels/Flexplates are also prone to catastrophic failure under extreme conditions and so for safety reasons only approved billet Flywheels/Flexplates are now required equipment in most motorsport applications.
Yella Terra designs and manufactures a large range of high performance quality billet Flywheels/Flexplates for the street and race track. The Yella Terra Flywheels/Flextplates are precision CNC machined from a solid steel billet and fitted with an OEM quality ring gear. They are available in a choice of standard and lightweight models. Some popular applications are also available in the new ultra lightweight reduced peripheral mass (RPM) designs that are effectively as light as alloy but with the strength of steel.
All Yella Terra Flywheels/Flexplates are SFI approved, making them safe to be used in motorsport applications and are in accordance with the specifications set out by SFI sanctioning bodies.
Features :
Billet Flywheels made to suit standard, road performance, drag racing and circuit racing applications
Precision CNC machined from a solid high carbon steel billet
Fitted with OEM quality gear ring
Available in ultra lightweight peripheral mass (RPM) designs
HOLDEN V8 VN-VS CCH286 HYD CAM
Hydraulic Camshaft H-286 (2500-6000 RPM Range) Suit Holden 5.0L EFI
HOLDEN V8 VN-VS CCH284 HYD CAM
H-284 Hydraulic Camshaft Holden V8 VN-on 222/222 @.050", .480/.480" Lift, 112 LSA
HOLDEN V8 VN-VS CCH276 HYD CAM
Hydraulic Camshaft H-276 (1800-4500 RPM Range) Suit Holden 5.0L EFI
HOLDEN 308 H304 236/236 520/520 -110
Hydraulic Camshaft H-304 (3000-6500 RPM Range) Suit Holden 235-308
HOLDEN 308 H286 230/230 496/496 -110
Hydraulic Camshaft H-286 (2200-6000 RPM Range) Suit Holden 235-308
HOLDEN VN SOLID F288 252/260 572/591-108
Solid Camshaft F-288 (4000-7500 RPM Range) Suit Holden 5.0L EFI
HOLDEN VN SOLID F280 244/248 553/562 109
F-280 Solid Camshaft Holden 5.0L EFI 244/248 @.050", .553/.562" Lift, 109 LSA
HOLDEN V8 VN-VS CCH268 HYD CAM
Hydraulic Camshaft H-268 (1500-4000 RPM Range) Suit Holden 5.0L EFI
HOLDEN 308 MECH CC288 252/260 572/591-108
Solid Camshaft CC288 (3800-7500 RPM Range) Suit Holden 235-308
HOLDEN 308 H276 218/218 472/472-110
Hydraulic Camshaft H-276 (1800-4800 RPM Range) Suit Holden 235-308 1970-88
Duration advertised Inlet 280°, Exh 280°
Duration advertised @ .050" Inlet 218°, Exh 218°
Valve lift with 1.6 rocker Inlet .472", Exh .472"
Lobe separation angle 110°
HOLDEN 308 H226 226/230 502/496-108
CRANE 253-308 HYD CAM 226/2 30 @ .050 108 LC .502/ .496 LIFT
YELLA TERRA FORD CLEVELAND 1.7 RATIO - 5/16" HYD PEDESTAL MOUNT
1.7 RATIO - 5/16" HYD PEDESTAL MOUNT Ford Cleveland/ Big Block 302-460 V8 Street Terra Roller Rockers Street Terra The best value rocker arm on the market today. Engineered to meet or exceed the needs of performance street and sportsman race applications. Our vacuum die cast arm is designed and engineered for optimum strength without the costs associated with billet CNC machining. The Street Terra series utilises the extreme duty hardware from our premium Platinum race series - ensuring a lifetime of trouble free performance. Our easyfit (EF) kits are a cost effective alternative for factory stamped steel rocker arms, which can be installed within less than an hour without cylinder head removal and in most cases without machining. Our wide range of true ratios allows you to achieve high lift without relying solely on your camshaft… a trend many engine builders and racers alike are adopting to relieve the inertia on lifters and pushrods generated by aggressive and often violent ramp rates required to make big lift. Popular amongst standard rebuilds where OEM equipment is worn and or scarce, as well as mild street applications.
FORD 351C F246 246/256 570/590 108
F-246 Solid Camshaft Ford 302-351C 246/256 @.050", .570/.590" Lift, 108 LSA
CHEV 383 12CC DISH HYP PISTON
350 ci SB Chev - Dish Top Hypereutectic Pistons
383 c.i., 4.030" bore, 3.750 stroke, 5.700" rod length, -12.0cc dome volume
Available on both hypereutectic and POWERFORGED pistons, DUROSHIELD is an exclusive moly-graphite skirt
coating that extends engine life and essentially eliminates scuffing. This technologically advanced coating is precisely applied to the piston through a computer-controlled process.
DUROSHIELD skirt coated pistons:
Reduce friction for increased fuel economy and horsepower
Essentially eliminate scuffing and wear
Prevent damage from inadequate lubrication, especially at start-up
Improve cylinder sealing for less blow-by and more power
Require no increase in skirt clearance
Piston Specifications :
CID: 383
Bore: 4.030
Stroke: 3.750
Rod Length: 5.700
Compression Height: 1.425
Compression Ratio with 64cc chamber volume: 9.67
Compression Ratio with 72cc chamber volume: 8.96
Compression Ratio with 76cc chamber volume: 8.65
Dome Volume: -12.0cc
Pin Type: Press or float
Recommended Ring Set: Moly - SPE251K 030, STD Fit - SPR9903 030, File Fit - SPR9343 035
Coated skirt